OEM or quiet muffler

[dogwhistle]

So I'm currently running a 3" to 4" can on a straight through 3" turbo back exhaust and it sounds good but drones a bit much in the cold mornings and on the highway. I am looking for anything that is quiet in the 3" inlet side of life. Thanks!

-Adam
612.8O2.24OO

[Twitch]

I have a 3" in 3" out resonator id be willing to get rid of. Should help a bit.

[Goat Blower]

To be reasonably quiet, you need a good muffler and a big resonator. I bought a new muffler this winter to quiet mine down a lot, but it's still straight 3" through.

[Bad Omen Racing]

I have an idea!! Straight pipe...

[dogwhistle]

Originally Posted by Twitch

I have a 3" in 3" out resonator id be willing to get rid of. Should help a bit.

Will it fit along side my driveshaft? or where does it go? I am interested in this for sure.

Originally Posted by Goat Blower

To be reasonably quiet, you need a good muffler and a big resonator. I bought a new muffler this winter to quiet mine down a lot, but it's still straight 3" through.

Yea makes sense, I'll be looking more at that setup I think.

Originally Posted by Bad Omen Racing

I have an idea!! Straight pipe...

Lol, Ben my neighbors and my headaches would certainly advocate otherwise but if that were possible I'd say bumper dump or side pipe...

[Goat Blower]

Yes, I have a 24" long, 5" diameter muffler right where the car went. It's a tight fit, but it doesn't rub on anything. I had a Thermal Research muffler in the back, but it's a little loud for my taste. I've got a new Vibrant on the floor next to it, now that it's warmed up a bit, I'll get out there and weld it in.

[dogwhistle]

Originally Posted by Goat Blower

Yes, I have a 24" long, 5" diameter muffler right where the car went. It's a tight fit, but it doesn't rub on anything. I had a Thermal Research muffler in the back, but it's a little loud for my taste. I've got a new Vibrant on the floor next to it, now that it's warmed up a bit, I'll get out there and weld it in.

Ahhh I see. Well I'll take a look and do some measurements and see what I can squeeze in.

[Trogdor]

http://www.maperformance.com/blog/un...lectronically/

[dogwhistle]

Originally Posted by Trogdor

http://www.maperformance.com/blog/un...lectronically/

I saw that Bobby and I'm tempted for something upfront and then just use a smaller diameter "cat" back with stock resonator and muffler, and up front run bumper dump... or open down somewhere. Hmm

[Trogdor]

I like my open dump. With a big enough turbo its only mega obnoxious when you want it to be.

[dogwhistle]

Originally Posted by Trogdor

I like my open dump. With a big enough turbo its only mega obnoxious when you want it to be.

Hahahah perfect way to put it!