My Talon

[GREASEMONKEY]

Well im kinda new to this site and have been working on my talon for close to 9 months now, im getting closer to done and just wanted to get some opinions on what people think/should do/ etc...

here are the mods...

Apexi avcr
Apexi safc
Hks super sequential bov
RC enginering 660cc injectors
JE piston set .020 over
Eagle rod set
.272 webcam cams
Aem fuel rail
Aem adjustable cam gears
Arp head studs
Magnus intake manifold
Sc61 turbo
Walboro 255lh fuel pump
Stage 3 front CV axels
Lower ball joints
Reman crankshaft
Bore .020, hone, and clean block
Infinity front and rear speakers
Sony color deck
Act 6 puck race clutch
Act 4900# pressure plate
Xact streetlight flywheel
Clutch slave cylander
Fluidine radiator
Turbonetics intercooler kit
Rebuilt head (next page)
Compustar alarm/remote start 2 way
Tenzo R black seats
Ported tubular exhaust manifold
PIT 40mm wastegate

HEAD WORK
__________________________________________________ ________
fererra intake valves
fererra exhaust valves
lifters
keepers
competion valve job 5 angle per valve
6 hours of port work
resurface head
tip valves, assemble cams, rocker arms, and lifters
set up valve spring height & check retainer/ seal
hone valve guides
rocker arms
valve seals
oil plugs
cam seals

and a couple of other things.. im making the ic piping myself, and i got it almost finished!

hopefully i will have it done before snow falls but you never know

[Halon]

Resize those suckas! Welcome.

[JET]

Originally Posted by greasemonkey0018

Act 6 puck race clutch
Act 4900# pressure plate

Holy hell!! I thought my 2900# clutch was stiff!!

It's looking good!

[Outlaw1]

What are your goals?

Looks like a bunch of $ $ $ so far.

[Jakey]

Stage 3 front CV axles? Huh?

How soon are you hoping to have everything up and running?

[Onefast99gsx]

Wow! 4900# pressure plate! You're gonna push the crank out the drivers side of the block

[niterydr]

Yeah that mods list doesn't make sence, but welcome anywho.

[cudvig]

haha sony color facedeck and a 4900! woot!

oh that sc61 is hotness.

hopefully its not some cheap ass manifold.


-Colin

[MisterCMK]

That looks pretty nice man

[GREASEMONKEY]

well all im waiting for is my manifold and wastegate. after that im going to button up some wiring and vacume lines, and thats it. so i hope to have it running in like a week or so, but you never know!

yea and the pictures... lol i dont know how to make them any smaller.

[GREASEMONKEY]

so last night i got around to putting my exhaust on and finished putting/ making my ic piping... and then i got curious and tried starting it... so for the first time in 9 months it ran.

later
stephan

[dsm10sec]

Originally Posted by greasemonkey0018

so last night i got around to putting my exhaust on and finished putting/ making my ic piping... and then i got curious and tried starting it... so for the first time in 9 months it ran.

later
stephan

I know exactly how that feels. Happy but still in agony, because you know it will happen again.