U have a turbo bigger than a 35R? Step yo game up!! (8s inside)

[turbotalon1g]

Post copied from another forum.

Hey guys, I'm very happy to say that my 96 Talon is the Worlds Quickest and Fastest 35r, with a time of 8.98 @ 163mph! This was done with E85 pump gas from a local Chicagoland gas station and a set of D.O.T. approved drag radials. I also set a record for the Quickest 4 cylinder pass ever at Byron Drag way. All I can say is, it wouldn't be possible without the support of the DSM community, thanks everyone!!!



Engine:
Built 2.0L, Howard rods, .020 over 9.0/1 compression Wisco HD Evo pistons, Kelford 280's, JMF drag intake manifold, Boomba Racing's 75mm Throttle Body

Chassis setup:
Brought back to life by Phil Davidson and his guys at 1st Impressions Collision out of Columbus Ohio, 8 point chromoly cage also installed by 1st Impressions Collision (Phil will take care of you if you guys need any work - its worth the out of state trip to go see him), Full Proathane bushing kit, Eiback Pro-Kit w/ KYB AGX's, 16" rota slipstreams w/ Hoosier 26" tall QTP drag radials (DOT approved)

Turbo setup:
FP 3586 HTA turbocharger, FP cast exhaust manifold, AMS DSM turbo kit (adapter plate/O2 housing), AMS Race intercooler

Drivetrain:
Boomba Racing's 2g rear differential cover, custom 4th diff mount, DSS stage 5 rear axles and HD driveshaft, Quartermaster Twin disc clutch, Shep stage 4 Trans with Evo 3 final drive

Engine management/Fuel system:
AEM EMS tuned by Devin Schultz @ Boomba Racing, Buschur COP w/ Dynatek arc-2, Two 044 Bosch inline fuel pumps, ID 2000 Fuel injectors, 8 gallon custom fuel cell, E85 fuel, No Nitrous!


The first weekend out:
41 psi, E85
9.34,9.25




Second weekend out:
45 psi, E85
9.11 @ 156, 8.98 @ 163




Tuning available at Boomba Racing on our Mustang Dyno, specializing in DSMLink, Open ECU/Ecu flash, and AEM EMS

The 8 second pass felt so perfect, except for the fact I hit the rev limiter in fourth at 9,800 rpm. This happened about 30-40 feet from the finish line. I think with a full slick and the rev limiter set to 10,000 rpm we might be able to go a little faster!!

Devin Schultz tuner/tech @ Boomba Racing

So JDM, swifty, anyone else using a bigger snail than a 35R, can u get close?
(close being 10mph & what say .5-.8secs?)

[mlomker]

10k rpm. Quite the beast there. I've never found racing very interesting...it's just money and skill. I know I'll never have the most of either and I'm sure that's the case with most people.

Build something that makes you smile every time that you get behind the wheel.

[123abc]

Originally Posted by mlomker

it's just money and skill.

Doesn't that apply to all automotive things?


Really moving for a 35r....hell, that's moving for any turbo....

[96GST16g]

wonder the hp and tq?

[Super Bleeder!!]

Badass. Is that supposed to be a movie link?

[turbotalon1g]

Yeah I failed. I hate photobucket type shit.

[TkrPerformance]

Nice

[niterydr]

That is moving for a 35R!

[C3L1CA]

Is that the same car that got hit last year? Strictly Modified or something like that was the shops name that had it. If so that thing moved out last year too.

Not even fair how quick it is.

[v8klla]

Sounds like he's running our rods Original link?

[turbotalon1g]

Yes this is the same 2G that got hit last year at the track.

It says howard rods, its from link.

SO how many of your rod's are out there? Any one running them in good powered daily's?

[4g63tcrazy]

I used to live close to these guys when I went to school in IL. The guy used to work at Stricly Modified but now he transfered over to Boomba racing. He was running I think 10.3's on the evo3 16g and last year moved to the 35r. He is a pretty insane tuner and pushes things to the limit. I actually passed him on my way to fill up on E85 at the same gas station in the talon.

[Pushit2.0]

That is crazy fast for that size turbo and boost level. I would like to see similar numbers some day out of my car.