MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Homefront! > Project Talk

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-09-2011   #1
93gtpeater
 

Join Date: Apr 2008
Location: stillwater
Drives: cbr 1000rr repsol
Posts: 1,451
Beater 1g

I figured I would make a project thread for the talon. I bought it about 2 years ago and have put about 30 miles on it. When I bought the car it came with a 16g but turned out to be a 14b.

Mods when I bought the car

Ghetto fmic
3 inch turbo back
Evo fuel pump
Safc
Wideband

When driving the car home the turbo froze up. So bought a scm61 to replace the blown 14b. when installing the new turbo the oil pan was messed up. so I went to replace the oil pan I pullied the t case off and the output shaft came out with the t case. So replaced the tranny from one I got from trk permance and it didnt make it down my road. The bearings were toast in it. Found a rebuilt tranny put it in and drove it a couple miles on it and the motor started making noise. So I picked up a parts car and put the drivetrain feom that in to my car.

Right now the car runs and drives. But needs a tune and a couple minor things.

Mods now

scm61
850cc injectors
Safc
Wideband
New short route intercooler
Ghetto 3 intake
2g maf
Evo fuel pump
Xtd 4 puck unsprung clutch
Ebay 38mm wastegate

I plan on upgrading to a 255hp fuel pump and get a eprom ecu and have shane tune it.
93gtpeater is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:32 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.