FS FP 20g TD06H Model Turbo

[95talonracer]

I have a FP 20g TD06H Model Turbo. I bought it last year and put on maybe 1500 or so miles and the guy before me had it rebuilt before he sold it. It has a little shaft play but seems like the normal amount. Upgraded so need to sell. There is one small crack that was welded but cracked a little futher but not major. It is setup for an external wastegate off of the o2 housing or I have a flap that you can weld in the stock wastegate hole to run off of the manifold or however you want. Send me an offer on this as I am not sure what it is really worth. Don't give me BS offers either. Thanks for the space. It is a real 20g and not a fake and is the largest one made. It is all factory mitsu flanges and will bolt right up to and 4g63 with water and oil cooling just like a t25 or a 14b. It also does NOT hit or come close to the water pipe. It has a 3" intake and a 2" outlet. It is also ported where the exhaust goes into the turbo by the o2 outlet for better lower boost control. $550 or B/O