1g n/t head?

santa · 12-15-2004

Is there any difference in a n/t head to a turbo head I have no idea. Also there is a kid thats wondering in my class if the motor's are different at all or what not also? as far as internals go? thanks!

Kevin

Jed · 12-15-2004

The heads are the same minus the cams of course. The later 1g's apparently had better coolant passages.

There are differences as far as the internals go, such as higher compression pistons on the N/T's, no oil squirters and probably a couple other things I'm forgetting or too lazy to think about.

santa · 12-16-2004

Ahh no crap. I should have thought about the internals as far as compression, and squirters and things. Thanks!

Kevin

LightningGSX · 12-20-2004

I don't think there's an oil feed for the turbo on the N/T head either.

12-28-2004

Yes there is, its just got a blockoff banjo bolt there.

The squirters are in the block and compression is controlled by the pistons unless you are shaving a bunch off the surface of the head so you can use a nt head and it will work fine.