Project Mistake 2g tsi

[schmitty1991]

So recently aquired a new tsi now ive been out of the dsm game for a while and always had that itch. Most of you probably know the car its been around here on style and was ready for a update.

First off car is a 1996 Eagle talon tsi Awd Auto ran great just trans slipped. Has a pte 50 trim turbo a front mount full exhaust and fic 1080s , good start to a project. First off was pulling motor and trans and cleaning up the bay and harness.



Got the motor and trans out Reason for all of this is i wanted to try to clean up the bay coat some parts fix the harness replace the head gasket ect.




Motor is twore down to a shortblock. Now at this point i have to decide what all exzactly i want to do here. Surprise soon

[schmitty1991]

Well made some good progress 2.3 stroker 6 bolt almost together

hopefully this next week should have motor and trans in car have to take care of a couple misc pieces like the 1g auto flex plate and starter plate. Then have to start working on my trans plan is to do 3/4 clutch packs oem TQ right now. this summer a 2500 sinister stall. If anyone has any input on how to convert my auto arness to delete my tcu that would be great want to do a manual valve body.

[PlanoEvo]

Very nice keep us updated!

[goodhart]

Where you at in flake anyways? Pretty sure I talked to you on facebook yesterday.

Who owned this car before you? Mod list makes it sound like pat's car.

If ya ever need a hand lemme know!

[turbotalon1g]

^bingo me thinks.

[schmitty1991]

Haha ive heard alot about you brownman. XD nicks right along side of me on this build too. As far as where i live right on the south side of second lake. And Yep pretty shure it was pats car he lived in moticello.

[schmitty1991]

So plans so far are Kiggly mod 3/4 clutch packs send out the 2g converter to get restalled and run a kiggly 6 bolt flexplate to mate the 2g trans. Plans will of course change but ill keep everyone updated !

[goodhart]

Does it have cf hood and hatch?

[schmitty1991]

Yes it was the car for sale in the classifieds here a while back.

Originally Posted by goodhart

Does it have cf hood and hatch?

[carltalon]

Originally Posted by schmitty1991

So plans so far are Kiggly mod 3/4 clutch packs send out the 2g converter to get restalled and run a kiggly 6 bolt flexplate to mate the 2g trans. Plans will of course change but ill keep everyone updated !

You will need the whole Kiggly 6-bolt in a 2g kit or you will burn up your pump. Other wise looking good. Nice choice on the stroker for the auto.

[schmitty1991]

Originally Posted by carltalon

You will need the whole Kiggly 6-bolt in a 2g kit or you will burn up your pump. Other wise looking good. Nice choice on the stroker for the auto.

Yep figured that out now i have to decide what stall want to run on my tq. don the road ill be doing a 6567 most likely just for this summer ill be running the pte 50

[turbotalon1g]

67mm? hot damn.

[schmitty1991]

Originally Posted by turbotalon1g

67mm? hot damn.

That's for next winter ! This summer will just be on the pte 50.

[goodhart]

Seems like all the local big turbo auto's have trouble building boost while their on the stall. They must need to have a decently high stall and/or a small shot of nawz?

[schmitty1991]

I may end up doing a 6262 that will be the borderline of needing spray or not. I'm Shure plans will change as I go along

[turbotalon1g]

Originally Posted by schmitty1991

That's for next winter ! This summer will just be on the pte 50.

yeah I saw that, your 2.3 50 trim setup is gonna be damn quick.

Originally Posted by goodhart

Seems like all the local big turbo auto's have trouble building boost while their on the stall. They must need to have a decently high stall and/or a small shot of nawz?

That was the tard kevin, blackawdtsi got that sorted out on his 6266.
Mondale is the other I know of and he uses spray.

Originally Posted by schmitty1991

I may end up doing a 6262 that will be the borderline of needing spray or not. I'm Shure plans will change as I go along

What is in your motor? rods, pistons, etc?
I've always wanted a stroker + 61mm, so I'm just doing that, luckily tech. has increase that power from mid 500s to 650+whp.

Good luck, interested to see this build progress.

[schmitty1991]

It's a Manley rod Mahle piston setup should support 800. Perma torque And h11's

[turbotalon1g]

^Very nice.
I'm looking to put a motor together slowly that is why I ask.

[schmitty1991]

Haha i kind of got showed into the full build... wasnt expecting to spend this much but hey shit happens just will be that much more fun

Originally Posted by turbotalon1g

^Very nice.
I'm looking to put a motor together slowly that is why I ask.

[schmitty1991]

WELL Back from the dead... Spent the last couple months getting parts together and saving. Hopefully it will be a faster process now.

Changed things up a bit Car will be running a scm61 precision bolt up instead of the Pte 50. Picked up a precision restall Kiggly 6 bolt to 2g kit, Working on my trans right now translab shift kit and end clutch packs.

I talked to Foreign Muscle And had My tcu reflashed to run a dual mode Kinda cool idea. Off a toggle i can have it shift itself or go to manu mode for tuning ect.

Have alot left to go hopefully the Next update wont be too long ha. On to some pics !