07-16-2013
|
#1
|
Join Date: Jun 2010
Location: Oakdale, MN
Drives: 95 AWD Mirage Coupe with AIDS
Posts: 230
|
TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
Turbo is gone, still have the o2 housing and wastegate.
The o2 housing is one I made at work on a jig, all stainless, has a 38mm Tial Vband flange and no o2 sensor bung because I'm on AEM and have zero use for a narrow band, could weld one on easy if you needed one.
Wastegate is just an Emusa one off EBay, works good and actually most everyone on HondaTech have good things to say about them. Don't have a dump tube but its the same as a Tial MVS 38mm.
Asking $150 for everything, open to offers, pm me if interested.
Last edited by punxnotdead185; 08-04-2013 at 11:42 AM..
|
|
|
07-16-2013
|
#2
|
Join Date: Jun 2012
Location: Twin Cities
Drives: 95 Talon TSI
Posts: 941
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
pm'd
__________________
BW8776, e-85
|
|
|
07-16-2013
|
#3
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
Any dyno sheets or anything?
|
|
|
07-16-2013
|
#4
|
Join Date: Jun 2010
Location: Oakdale, MN
Drives: 95 AWD Mirage Coupe with AIDS
Posts: 230
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
No, I had a 90 and my oil cooler lines leaked and they would get pissed at work if I dumped oil all over their dyno, plus we are so busy its hard to even get on there, plus my transmission died unexpectedly on the way to proving grounds so never got a chance to run it, now on the Mirage I can't intercool it because of a lack of room so numbers out of that thing would be pointless.
|
|
|
07-28-2013
|
#5
|
Join Date: Jun 2010
Location: White Bear Lake, MN
Drives: Swifty Crazy
Posts: 439
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
Still have this setup? I'd like to check it out. Text me please. 651-315-1081
__________________
1989 Colt GT
2013 Ford Focus
1999 Buell M2
|
|
|
07-29-2013
|
#6
|
Join Date: Jun 2010
Location: White Bear Lake, MN
Drives: Swifty Crazy
Posts: 439
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
Pretty Please?
__________________
1989 Colt GT
2013 Ford Focus
1999 Buell M2
|
|
|
07-30-2013
|
#7
|
Join Date: Sep 2010
Location: New Hope, MN
Drives: 91 Eclipse GST
Posts: 250
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
The 20g you sold me just seized today and I got 3639 miles on it. You said it was fully rebuilt and everything was fine. I had good flowing oil from head with stainless braided line, and stock coolant line going to it. Only boosted 27lbs. How can anyone trust this now? It would be nice if something could come out of this...
|
|
|
07-30-2013
|
#8
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
ouch
|
|
|
07-30-2013
|
#9
|
Got Boost o_O'' m
Join Date: Sep 2009
Location: In a house
Drives: 1991 Eagle Talon TSI AWD Spooling Fiddy Trim Style
Posts: 1,389
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
Quote:
Originally Posted by turbotalon1g
ouch
|
Sucky for sure, Im curious as to what is up with this trend lately... of people selling things that are shifty...not even out of state but to people within our own community? & not coming halfway...I dont get it....I guess if punx is a stand up guy he might work something out with the poor guy...like take that busted supposed rebuild back... plus some cash to front for another rebuild kit in exchange for the one he is selling right now? Then again the one he is selling maybe could brake and we would be back to ground zero...sigh people only buy from reputable vendors and people....(I hear he supposedly worked at MAP?)
Buyer's Be ware,
|
|
|
07-30-2013
|
#10
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
I agree with you a little there and its why I don't really deal with anyone new.
I've had all kinds of people buy from me with no issues, apart from one guy that was an asshat and even most on here said the same thing.
Anywho, good luck to all and this is a private party deal has nothing to do with any vendors on here.
|
|
|
07-30-2013
|
#11
|
Join Date: Jun 2010
Location: Oakdale, MN
Drives: 95 AWD Mirage Coupe with AIDS
Posts: 230
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
Quote:
Originally Posted by dsm_talontsi
The 20g you sold me just seized today and I got 3639 miles on it. You said it was fully rebuilt and everything was fine. I had good flowing oil from head with stainless braided line, and stock coolant line going to it. Only boosted 27lbs. How can anyone trust this now? It would be nice if something could come out of this...
|
I can assure you it was assembled correctly and it was balanced on the best turbo balancer in the state to under half factory spec, factory is 2 grams out of balance and I balance the turbos I plan on personally using to under 1 gram just for extra security, this turbo I was going to use before I changed my setup so it was built and balanced with those intentions. I'm sorry it messed up on you, I didn't hear anything about it before this other than a text several hours ago, not trying to resolve anything, just you threatening my employment when you tell them how I scammed you. Maybe you should have at least contacted me and try and resolve the problem before sending me threatening texts involving my job and posting this up on here??? Just a thought.
|
|
|
07-30-2013
|
#12
|
Join Date: May 2005
Location: Linwood, MN
Drives: You crazy!
Posts: 2,354
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
Agreed nothing to do with vendors at all. If it was a used turbo then it's exactly what it is used.
I know a few people going through warranty issues right now with somewhat reputable turbo company's that they purchased new and there a list of things that need to be figured out before you just say here's my old turbo now give me my new one.
With that said threating gets you no where. Except in the wrong direction.
If you wanted a warranty then you should of shelled out the cash for a map, precision, fp ect.
Not taking sides either just my opinion fwiw
|
|
|
07-31-2013
|
#13
|
Join Date: Sep 2010
Location: New Hope, MN
Drives: 91 Eclipse GST
Posts: 250
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
When you first sold me this turbo it had a huge chip missing out of the chra and no compressor cover seal was there. Then I brought it back and you had it fixed by matt. You tried to tell me at first that it was someone else that fucked it up. Then when I asked you if it was matt at map that built it, you confessed and said it was indeed YOU that messed it up. I really don't know what to think of this situation. But if some kind of help can be had, then I would greatly appreciate it and keep doing business. Hell if I know that this turbo you're selling is good I might buy it. But as of right now I have a seized 20g sitting in my car. Sometypeof compensation or help would be nice right now.
|
|
|
07-31-2013
|
#14
|
Join Date: Jun 2010
Location: Oakdale, MN
Drives: 95 AWD Mirage Coupe with AIDS
Posts: 230
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
Well when do you have time? I have most everything to fix anything that could be wrong with it, bearing housing turbine shafts etc. so its not a big deal for me to fix it for you, if you want come you can watch me run it on the balancer for all I care lol. Like I said all you would have had to do was text me and be like this thing fucked up and I would have just fixed it or possibly just give you the one I'm selling if it can't be fixed and it blew up from some reason not involving oil contamination or a faulty BOV surging it or one of the many reasons that even a reputable turbo company would deny a warranty claim because of. Making a big deal and trying to involve my employer was unnessisary. PM me cuz my phone is broken right now.
|
|
|
07-31-2013
|
#15
|
Join Date: Sep 2010
Location: New Hope, MN
Drives: 91 Eclipse GST
Posts: 250
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
Pm sent. Sorry about the whole deal yesterday, I was wrong to say what I did. The no boost thing got to me and I shouldve thought about it in a better way. Let's make this right
|
|
|
08-04-2013
|
#16
|
Join Date: Jun 2010
Location: Oakdale, MN
Drives: 95 AWD Mirage Coupe with AIDS
Posts: 230
|
Re: TD05H 20g, stainless o2 housing for Tial 38mm Vband wg, Emusa 38mm Vband WG
Turbo is gone, still have the o2 housing and wastegate.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|