MitsuStyle - View Single Post

**Shane@DBPerformance** · 08-01-2005

No, the outer ones will sit up higher. The inners should line up with the top edge of the head where the valve cover gasket sits on. You should be able to put a straight edge across the center of the 2 cam gear bolts and have them line up with the 2 inner marks. The outers will not line up ever.

08-01-2005	#7
Shane@DBPerformance formerly ecoli Join Date: Oct 2003 Location: On the dyno Posts: 4,892	Re: timing marks on cam gears No, the outer ones will sit up higher. The inners should line up with the top edge of the head where the valve cover gasket sits on. You should be able to put a straight edge across the center of the 2 cam gear bolts and have them line up with the 2 inner marks. The outers will not line up ever. __________________ www.dbptuning.com