View Single Post
Old 05-02-2005   #2
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Re: Getting serious about a FMIC, need options...

Quote:
Originally Posted by howslowcanyougo

Where are these these "key" bolts, up inside the bumper, on the bottom or?

And just why do you need to take the headlight bolt off if you already have the bumper off?
Those "key" bolts might be hard to find, they are a bit up under the car. You shouldn't have to remove the headlights the way I do it. The rest of the stuff in that front bumper removal needs to be done whichever way you do it though.

If you look at this picture and see the around 1.5" x 1.5" square holes in the frame on each side of the intercooler, that is where the bumper supports I am talking about slide into. So if you follow those holes back underneath the car maybe 6 inches, you should see 2 bolts holding the bracket to the frame. The bolts are a few inches apart.

http://www.mnsportcompacts.net/forum...etimage&id=670
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote