MitsuStyle - View Single Post

**Shane@DBPerformance** · 04-25-2005

I have loctited then in before and did it on my car. I also didn't run them all the way bottomed out on my car, I back them off a little bit. I tried to make sure that mine were all about at the same height. I torqued mine to 90 or 95 ft-lbs and didn't re-torque them. You shouldn't have to re-torque head studs with a Cometic headgasket.

04-25-2005	#17
Shane@DBPerformance formerly ecoli Join Date: Oct 2003 Location: On the dyno Posts: 4,892	Re: ARP Head bolt install help needed. I have loctited then in before and did it on my car. I also didn't run them all the way bottomed out on my car, I back them off a little bit. I tried to make sure that mine were all about at the same height. I torqued mine to 90 or 95 ft-lbs and didn't re-torque them. You shouldn't have to re-torque head studs with a Cometic headgasket. __________________ www.dbptuning.com Last edited by Shane@DBPerformance; 04-25-2005 at 08:32 PM..