MitsuStyle - View Single Post - timing--> valves?

Pushit2.0 · 12-01-2004

Just make sure the cams are taken out of the head. It should be obvious as to what valves are bent, if they are. The exaust valves just get more build up then the intake valves I dont think that would be detonation. So if the piston and cylender wall look fine I would lap the valves, get it decked, and some new valve seals. Good luck with the car.

~John

12-01-2004	#7
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Just make sure the cams are taken out of the head. It should be obvious as to what valves are bent, if they are. The exaust valves just get more build up then the intake valves I dont think that would be detonation. So if the piston and cylender wall look fine I would lap the valves, get it decked, and some new valve seals. Good luck with the car. ~John __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.