MitsuStyle - View Single Post

Perkul8r · 05-20-2011

Ok so far I have been able to change the plugs and wires. Haven't gotten a chance to pull down the ECU and check it out.

Also, the car has only done the hesitation like once or twice since I changed plug wires.

Now the other thing going on is that when it comes down to an idle the oil light will flash on the dash. But the car is not low on oil. Its actually a touch over full. So not sure whats going on there.

But to help out I did find a cheap logging setup. Its just a Palm data logger. But it will work and help read my DTC's..

05-20-2011	#4
Perkul8r Join Date: May 2010 Location: Glendive, Montana Drives: 91 GVR4 Posts: 585	Re: Stalling under load. Ok so far I have been able to change the plugs and wires. Haven't gotten a chance to pull down the ECU and check it out. Also, the car has only done the hesitation like once or twice since I changed plug wires. Now the other thing going on is that when it comes down to an idle the oil light will flash on the dash. But the car is not low on oil. Its actually a touch over full. So not sure whats going on there. But to help out I did find a cheap logging setup. Its just a Palm data logger. But it will work and help read my DTC's.. __________________ DSM....Because broken timing belts, cheap interior, transfer case leakage, and crankwalk is to weed out the weak.