[blageo23]

We have a few projects on our hands lately and here is one of them.
Custom wiring harness.
5.7l out of a 2005 CTS-V

We wanted to get rid of all the wires that were no longer needed and also move the ECU from the drivers side fender to the inside of the car. It has taken a couple days working on it on and off but it is coming together very well. Here are some pictures I took with my cell while working on it.

Sorry for the picture quality

Harness after taking the loom off





Passenger Side





Driver Side





Back



With The Covers On







Passenger Side Taped Up



Everything Taped Up



Interior (So Far)



The harness still needs to be loomed. The interior part needs to be gone through and wires shortened as well as re-pinning the ECU.

(The type of car is not listed at this time for a reason)