MitsuStyle - View Single Post

**Shane@DBPerformance** · 02-11-2011

Using sequence shown in Fig. 4, tighten cylinder head bolts in two or three steps to a final torque of 53 ft. lbs . Cylinder head bolts must be tightened in two or three steps to ensure correct cylinder head to cylinder block seating.

VALVE CLEARANCE SPECIFICATIONS

Intake, Inch
Hot 0.008
Cold 0.004

Exhaust, Inch
Hot 0.010
Cold 0.007

02-11-2011	#5
Shane@DBPerformance formerly ecoli Join Date: Oct 2003 Location: On the dyno Posts: 4,892	Re: 4G15 head bolt torque and valve lash Using sequence shown in Fig. 4, tighten cylinder head bolts in two or three steps to a final torque of 53 ft. lbs . Cylinder head bolts must be tightened in two or three steps to ensure correct cylinder head to cylinder block seating. VALVE CLEARANCE SPECIFICATIONS Intake, Inch Hot 0.008 Cold 0.004 Exhaust, Inch Hot 0.010 Cold 0.007 __________________ www.dbptuning.com