Re: Idle, Idle Surge, Timing Adjustment and heat...
Quote:
Originally Posted by tpunx99GSX
no no no. When i did the head gasket i used a blockoff plate on the TB. originally i had just not hooked up the lines, but i found that to be the idle surge issue when it was surging all of the time.
|
OK, now put an actual BISS screw with new o-ring and cap in there. Total it will probably be under $15 from the dealership.
__________________
Quote:
Originally Posted by Murlo26
I agree with Kracka.
|
|