MitsuStyle - View Single Post - Considering stroker, looking for feedback

95talonracer · 06-24-2009

I used a 6 bolt 2.0 block with a 2.4 crank in my 2.3 build. I ended up using my eagle rods and bought wiseco 2.3 pistons with i think it is 8.8 compression and I love it. I would say go ahead and do it. I have heard that some rods need clearancing of the block and some dont but I needed to clearance just a little on the block and part that bolts to the crank. I also have 2.5 piping, 1g nt tb but crower 414 cams on e85 and a scm6152rs with a maxed out 255 pump.

06-24-2009	#8
95talonracer Finally Tuned... Join Date: Apr 2006 Location: Zimmerman Drives: Spyder GSX Posts: 2,484	Re: Considering stroker, looking for feedback I used a 6 bolt 2.0 block with a 2.4 crank in my 2.3 build. I ended up using my eagle rods and bought wiseco 2.3 pistons with i think it is 8.8 compression and I love it. I would say go ahead and do it. I have heard that some rods need clearancing of the block and some dont but I needed to clearance just a little on the block and part that bolts to the crank. I also have 2.5 piping, 1g nt tb but crower 414 cams on e85 and a scm6152rs with a maxed out 255 pump. __________________ 94 Supra TT Auto, Project 9.xx in the works 97 Spyder AWD 6 bolt 2.3, 579hp 496tq FOR SALE Amsoil Dealer Last edited by 95talonracer; 06-24-2009 at 08:51 AM..