[Kracka]

The pinstripe was cleared over, thats why I went with the 80-grit. I used a 3M sanding block. I will be getting sandable primer. Will a gray primer vs. a white one affect the final color as long as I get 2-3 coats of color over it? I plan on wetsanding my color coats starting with 1000-grit working my way to 2000-grit. Should I sand the final color coat before the clear goes on? I am guessing I should lightly sand the clear coats with 2000-grit, then only buff the final clear coat with an oribital buffer and thin-cut 3M compound?