View Single Post
Old 11-29-2007   #69
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Re: manifold advice?

265awhp on a Dyno Dynamics does not seem out of line at all with the parts on the car. I would probably switch to some good cams before going too far. My wifes car with a 50-trim, FMIC, HKS 272, etc put down something like 263awhp on our dyno at 19-20psi on pump gas. The exact same setup/tune put down 340whp at Elite. Her car went from the 263 to 384ish awhp on the Dyno Dynamics on race gas.

Realistically, don't expect good numbers from most setups on pump gas on a DSM, they are usually knock prone and not the most efficient motors ever, they shine at being able to handle high boost/high power without flying apart, but that usually takes higher octane.
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote