MitsuStyle - View Single Post

Onefast99gsx · 06-06-2007

Thank you JET. I was hoping one of you logged on soon and posted something so I could stop checking the site so much while at work

The only extra thing I was going to do was minutes prior to starting, add all the oil with the valve cover off. Dump it all over the cams and valve train and bolt the VC back on and then do what Vicious said to do above. The crank will already be rotating in oil when cranking over. Then just a matter of oil getting on the cyl walls.

Thanks guys.

06-06-2007	#5
Onefast99gsx Join Date: Sep 2004 Location: Wisconsin Posts: 1,411	Re: Starting rebuilt engine for the 1st time Thank you JET. I was hoping one of you logged on soon and posted something so I could stop checking the site so much while at work The only extra thing I was going to do was minutes prior to starting, add all the oil with the valve cover off. Dump it all over the cams and valve train and bolt the VC back on and then do what Vicious said to do above. The crank will already be rotating in oil when cranking over. Then just a matter of oil getting on the cyl walls. Thanks guys.