MitsuStyle - View Single Post

**JET** · 04-23-2007

I run mine about 12" from the turbo outlet. When I got mine I was recommended 12 - 15" from the turbo. You will know if you have a problem if you stop getting readings from the WB02, then it is turning on the heating element to get warmed up again. It you get times where the reading stops for 10 - 15 seconds, then comes on again, that is your problem. The readings should still be accurate though.

04-23-2007	#5
JET Is funding Exxon. Join Date: Oct 2003 Location: Ham Lake Drives: like a bat outta hell! Posts: 7,983	Re: Wideband sensor location I run mine about 12" from the turbo outlet. When I got mine I was recommended 12 - 15" from the turbo. You will know if you have a problem if you stop getting readings from the WB02, then it is turning on the heating element to get warmed up again. It you get times where the reading stops for 10 - 15 seconds, then comes on again, that is your problem. The readings should still be accurate though. __________________ Is burning corn and stayin' warm! My motorcycle is stock and reliable, my Talon is neither!