MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   Where can I get u-joints and/or CV joints rebuilt? (http://www.mitsustyle.com/forums/showthread.php?t=23879)

FattyBoomBatty 07-26-2009 12:21 PM

Where can I get u-joints and/or CV joints rebuilt?
 
Is there a shop that specializes in this around here? I figure you need a press to get some of the stuff apart, but I can remove the parts and bring them in.

My rear end stuff is clinking and seems to have a lot of "lash" I don't believe it's the diff since there's a loud click on each side whenever I take off.

Super Bleeder!! 07-26-2009 02:07 PM

Re: Where can I get u-joints and/or CV joints rebuilt?
 
You dont need a press, but its a messy job thats not fun at all.

Just bring your axles into napa as a core, pay 50 bux, and walk out with a nice clean new axle.

FattyBoomBatty 07-26-2009 05:34 PM

Re: Where can I get u-joints and/or CV joints rebuilt?
 
They will just look at me funny if I tell them what it's from. They'll say, "A Concord?" In other words, is I don't like napa too much.

goodhart 07-26-2009 11:36 PM

Re: Where can I get u-joints and/or CV joints rebuilt?
 
^^^ Reminds me of Auto Value, half of them have Talon's under AMC, as in the AMC Eagle not AMC Eagle Talon. Retards...

TkrPerformance 07-27-2009 05:07 PM

Re: Where can I get u-joints and/or CV joints rebuilt?
 
We get a huge discount at craigs store brooklyn center orillys

FattyBoomBatty 07-27-2009 06:13 PM

Re: Where can I get u-joints and/or CV joints rebuilt?
 
Yeah, and I need to drop off an old cracked engine block there. Maybe I should pay a visit. I should call first though. Or just explore the option of rebuilding it myself. I guess there's a technical service bulletin out for the clicking.

Super Bleeder!! 07-27-2009 08:02 PM

Re: Where can I get u-joints and/or CV joints rebuilt?
 
Just bring them a part number so there is no confustion then niqqa

http://www.napaonline.com/masterpage...d=8&SubCatId=8

Goat Blower 07-27-2009 09:27 PM

Re: Where can I get u-joints and/or CV joints rebuilt?
 
Marty at www.raxles.com

FattyBoomBatty 07-27-2009 10:38 PM

Re: Where can I get u-joints and/or CV joints rebuilt?
 
Quote:

Originally Posted by Super Bleeder!! (Post 298885)
Just bring them a part number so there is no confustion then niqqa

http://www.napaonline.com/masterpage...d=8&SubCatId=8

lulz

Quote:

Browse Catalog >> Drive Train >> CV Driveshafts & Prop Shafts
Vehicle: 1988 >> Chrysler >> Conquest





There were no matches for your search. You may want to try:


Not sure which parts you need?
Try browsing through our catalog by category.

Looking for a part or accessory for a classic car?
Click here for hard to find parts.


Some parts and accessories may not be available online, check your local NAPA AUTO PARTS Store for hard to find parts as well as non-shippable items.


Super Bleeder!! 07-27-2009 11:24 PM

Re: Where can I get u-joints and/or CV joints rebuilt?
 
search for starion parts instead

Gravy 07-28-2009 04:34 PM

Re: Where can I get u-joints and/or CV joints rebuilt?
 
If the car is the same(I.E. Eclipse/Talon/Laser) the parts will be the same, and the results will yield him the same.

I'll check north metro stock tomorrow at work, online search shows nothing for Oreilly's so odds are there are none in stock.

FattyBoomBatty 07-29-2009 08:31 AM

Re: Where can I get u-joints and/or CV joints rebuilt?
 
Yeah, it's kindof the reason I went straight to asking where to get them "rebuilt." You two have learned the quick and easy way that you can't just go buy shit for this car. You either make it/do it yourself, or pay someone a lot of money to do the same thing.


All times are GMT -5. The time now is 12:04 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.