Tom's 92 1G Talon partout thread
Hey guys, So i have decided that this bitch needs to be parted out. The bearing spun and messed up the crank. Here is a short list of parts off the top of my head with approximate prices. Shoot me a pm if you want something.
1992 Eagle Talon TSI AWD 250 miles driven after the complete rebuild Stock parts: Transmission - Shifts perfectly not a single grind. $300 Head - Stock 6 bolt head resurfaced and completly cleaned up by MAP loaded with stock valves and springs. 4 valves were replaced on the #4 cylinder. $250 ECU - No issues with this. SOLD 4 bolt rear end - $125 Xfer Case - $100 Working hatch props - $40 Radiator (no leaks, no corrosion) $35 Throttle body - bottom half blocked off $25 Exhaust Manifold - $35 14b - No shaft play, some chips on exhaust wheel - $25 Intake manifold - Cleaned all carbon with 2 cans of degreaser and a brush $35 Full interior/exterior - Post what you need and ill give you a price. Ask for any other parts you need Aftermarket parts: Thermal Exhaust turbo back - Very good shape with test pipe. - $500 Tial Q Blow Off Valve - $175 (looks new) Crane Fireball Ignition ready for install - $125 XS Power FMIC Core - $60 (size: 24"x3"x6") Black/silver Rota Slipstream 17" wheels with crappy tires - These look pretty good, one of them was repaired (welded on the lip) - $350 Shift Light with digital RPM display and peak readout - $40 Manley I Beam Connecting rods - $550(http://www.maperformance.com/manley-...ting-rods.html) Mahle 040 over 8.7:1 pistons with wrist pins. (with this set i will give you 7 pistons, four for the car and 3 extras in case you need them as you cannot get these anymore) $300 Sheet metal Oil Pan - $50 (has a dent from where the rod cap had hit before the rebuild) Oil Pressure gauge - $25 Boost gauge - $25 Lightened flywheel (not sure the brand) but still in good shape - $75 Solid motor mounts - drivers side and passengers side - $40 Motor mount inserts for front and rear - $10 Power Enterprizes Kevlar (blue) Timing belt - no cracks $25 Headlights (resurfaced) with HIDs - SOLD Brand new 1gb dual piston Calipers with pads and slotted rotors (less than 250 miles on them) $200 ARP L19 Head studs - $100 ARP Main Studs - $45 2 cranks in need of resurface one with recessed oiling holes - $25 each Shaved and polished Valve Cover - $30 FMIC piping 2" flanged for tial - $40 Taylor 409 Spiro Pro Race spark plug wires (excellent condition) - $45 I will try and get some pictures up today Ill add more after i get home and look at the car, im sure im missing items. Enjoy Tom |
Re: Tom's 92 1G Talon partout thread
Can u shoot me some pics of the FMIC core please
|
Re: Tom's 92 1G Talon partout thread
Will the ecu work for my 91 tsi 5 speed?
|
Re: Tom's 92 1G Talon partout thread
Quote:
http://sphotos.ak.fbcdn.net/hphotos-..._4798526_n.jpg |
Re: Tom's 92 1G Talon partout thread
Quote:
|
Re: Tom's 92 1G Talon partout thread
Thats cool, just get the measurements.
|
Re: Tom's 92 1G Talon partout thread
Also forgot to add the Headlights that i resurfaced and look awesome. and come with or can come without HIDs with all of the wiring. (currently can give a demo of them working.)
Added to the OP. |
Re: Tom's 92 1G Talon partout thread
What color is the bov?
|
Re: Tom's 92 1G Talon partout thread
Quote:
|
Re: Tom's 92 1G Talon partout thread
What kind of oil pressure gauge is it?
|
Re: Tom's 92 1G Talon partout thread
Those lights are sexy!
and that ECU will work in any 91+ Its just the 90s you have to switch the two pins (6 and 14?) Something like that. -Colin |
Re: Tom's 92 1G Talon partout thread
Quote:
|
Re: Tom's 92 1G Talon partout thread
I may want those headlights, with the HID kit, and should send some measurements and pics of he fmic core to hebert2190@gmail.com, thanks tom.
|
Re: Tom's 92 1G Talon partout thread
wanna get me a price on the front bumper and is it cracked or anything? also send me a price for the headlights and hid kit. thanks
|
Re: Tom's 92 1G Talon partout thread
The Headlights and HIDs im putting up for $60 for the whole shibang.
Front bumper ill give to you for $35. Its in good shape. just could use some paint (the car was painted before i got it and was a very crappy paint job. they didnt rough up the under coating which is gloss black. so the paint is chipping here and there, but i dont think the bumper was cut at all. Ill verify this when i get home. |
Re: Tom's 92 1G Talon partout thread
do you a number I can call you? I would like to see if its possible to come get ECU this afternoon.:threadjacked:
|
Re: Tom's 92 1G Talon partout thread
Ok guys, i hate to do this, but it seems there is going to be a problem with the HIDs.
The problem is that 4 of you so far want them tonight and i only have one set. So instead of raising the price and making a bidding war. We will do this. The guy who wants the most parts (money wise) will get them. So far the current high bidder is: Dalton DSM with a Front bumper and the HIDs/headlights. Mainly this is just so that i dont have 4 people heading over at the same time and then complaining about how when they got there i didnt have the parts. |
Re: Tom's 92 1G Talon partout thread
HOw much for the roller?
|
Re: Tom's 92 1G Talon partout thread
Quote:
|
Re: Tom's 92 1G Talon partout thread
How much do you want for that sturdy work bench you got there?
|
All times are GMT -5. The time now is 06:12 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.