Tom's 92 1G Talon partout thread
 

Hey guys, So i have decided that this bitch needs to be parted out. The bearing spun and messed up the crank. Here is a short list of parts off the top of my head with approximate prices. Shoot me a pm if you want something.

1992 Eagle Talon TSI AWD
250 miles driven after the complete rebuild
Stock parts:
Transmission - Shifts perfectly not a single grind. $300
Head - Stock 6 bolt head resurfaced and completly cleaned up by MAP loaded with stock valves and springs. 4 valves were replaced on the #4 cylinder. $250
ECU - No issues with this. SOLD
4 bolt rear end - $125
Xfer Case - $100
Working hatch props - $40
Radiator (no leaks, no corrosion) $35
Throttle body - bottom half blocked off $25
Exhaust Manifold - $35
14b - No shaft play, some chips on exhaust wheel - $25
Intake manifold - Cleaned all carbon with 2 cans of degreaser and a brush $35

Full interior/exterior - Post what you need and ill give you a price.
Ask for any other parts you need

Aftermarket parts:
Thermal Exhaust turbo back - Very good shape with test pipe. - $500
Tial Q Blow Off Valve - $175 (looks new)
Crane Fireball Ignition ready for install - $125
XS Power FMIC Core - $60 (size: 24"x3"x6")
Black/silver Rota Slipstream 17" wheels with crappy tires - These look pretty good, one of them was repaired (welded on the lip) - $350
Shift Light with digital RPM display and peak readout - $40
Manley I Beam Connecting rods - $550(http://www.maperformance.com/manley-...ting-rods.html)
Mahle 040 over 8.7:1 pistons with wrist pins. (with this set i will give you 7 pistons, four for the car and 3 extras in case you need them as you cannot get these anymore) $300
Sheet metal Oil Pan - $50 (has a dent from where the rod cap had hit before the rebuild)
Oil Pressure gauge - $25
Boost gauge - $25
Lightened flywheel (not sure the brand) but still in good shape - $75
Solid motor mounts - drivers side and passengers side - $40
Motor mount inserts for front and rear - $10
Power Enterprizes Kevlar (blue) Timing belt - no cracks $25
Headlights (resurfaced) with HIDs - SOLD
Brand new 1gb dual piston Calipers with pads and slotted rotors (less than 250 miles on them) $200
ARP L19 Head studs - $100
ARP Main Studs - $45
2 cranks in need of resurface one with recessed oiling holes - $25 each
Shaved and polished Valve Cover - $30
FMIC piping 2" flanged for tial - $40
Taylor 409 Spiro Pro Race spark plug wires (excellent condition) - $45
I will try and get some pictures up today
Ill add more after i get home and look at the car, im sure im missing items.
Enjoy
Tom

Re: Tom's 92 1G Talon partout thread
 

Can u shoot me some pics of the FMIC core please

Re: Tom's 92 1G Talon partout thread
 

Will the ecu work for my 91 tsi 5 speed?

Re: Tom's 92 1G Talon partout thread
 

Heres a pic of the front of the car. i can take one with the bumper off tonight.
http://sphotos.ak.fbcdn.net/hphotos-..._4798526_n.jpg

Re: Tom's 92 1G Talon partout thread
 

I believe so due to this being a pre 92.5

Re: Tom's 92 1G Talon partout thread
 

Thats cool, just get the measurements.

Re: Tom's 92 1G Talon partout thread
 

Also forgot to add the Headlights that i resurfaced and look awesome. and come with or can come without HIDs with all of the wiring. (currently can give a demo of them working.)
Added to the OP.

Re: Tom's 92 1G Talon partout thread
 

What color is the bov?

Re: Tom's 92 1G Talon partout thread
 

Red. No scratches on it, and i can cut off the flange if you want it to weld onto some piping. (the fmic piping is really small like 2" so i dont think anyone will take that)

Re: Tom's 92 1G Talon partout thread
 

What kind of oil pressure gauge is it?

Re: Tom's 92 1G Talon partout thread
 

Those lights are sexy!

and that ECU will work in any 91+

Its just the 90s you have to switch the two pins (6 and 14?) Something like that.

-Colin

Re: Tom's 92 1G Talon partout thread
 

Autometer Ultralite and the Boost gauge is a prosport eletric with the opening ceromony.

Re: Tom's 92 1G Talon partout thread
 

I may want those headlights, with the HID kit, and should send some measurements and pics of he fmic core to hebert2190@gmail.com, thanks tom.

Re: Tom's 92 1G Talon partout thread
 

wanna get me a price on the front bumper and is it cracked or anything? also send me a price for the headlights and hid kit. thanks

Re: Tom's 92 1G Talon partout thread
 

The Headlights and HIDs im putting up for $60 for the whole shibang.

Front bumper ill give to you for $35. Its in good shape. just could use some paint (the car was painted before i got it and was a very crappy paint job. they didnt rough up the under coating which is gloss black. so the paint is chipping here and there, but i dont think the bumper was cut at all. Ill verify this when i get home.

Re: Tom's 92 1G Talon partout thread
 

do you a number I can call you? I would like to see if its possible to come get ECU this afternoon.:threadjacked:

Re: Tom's 92 1G Talon partout thread
 

Ok guys, i hate to do this, but it seems there is going to be a problem with the HIDs.
The problem is that 4 of you so far want them tonight and i only have one set. So instead of raising the price and making a bidding war. We will do this.
The guy who wants the most parts (money wise) will get them.
So far the current high bidder is:
Dalton DSM with a Front bumper and the HIDs/headlights.
Mainly this is just so that i dont have 4 people heading over at the same time and then complaining about how when they got there i didnt have the parts.

Re: Tom's 92 1G Talon partout thread
 

HOw much for the roller?

Re: Tom's 92 1G Talon partout thread
 

Depends on what you want with it?

Re: Tom's 92 1G Talon partout thread
 

How much do you want for that sturdy work bench you got there?

Re: Tom's 92 1G Talon partout thread
 

Body suspension rear end brakes and wheels. Don't really need interior parts, it would be a gutted drag car so it doesn't need to have much on it.

Re: Tom's 92 1G Talon partout thread
 

Did you want the drivetrain and transmission as well?
There is currently no ebrake, the guy before me cut the lines. (Should be an easy fix)
I upgraded the fronts to brand new set of dual piston calipers with my slotted rotors from my last 2g.

Re: Tom's 92 1G Talon partout thread
 

how much you thinking with the trans back? Not trying to sound like a cheap ass but trying to go as cheap as possible since it will just be for the track.

Re: Tom's 92 1G Talon partout thread
 

I was thinking $850 for the car with the tranny, drivetrain, brakes, wheels, etc. If your interested we can have you come over and hash out the details on what you want included and what you dont.
BTW, the car has a clean title, and registration until 2011.

Re: Tom's 92 1G Talon partout thread
 

I was thinking $850 for the car with the tranny, drivetrain, brakes, wheels, etc. If your interested we can have you come over and hash out the details on what you want included and what you dont.
BTW, the car has a clean title, and registration until 2011.

Re: Tom's 92 1G Talon partout thread
 

Sounds good give me a little bit and I will let you know.

Re: Tom's 92 1G Talon partout thread
 

my roomate is intrested in your trans and does it still have the throw out bearing

Re: Tom's 92 1G Talon partout thread
 

sent you a PM.

Re: Tom's 92 1G Talon partout thread
 

did anybody ever get those hid's? I will come whenever and pick them up if they're still available along with the front bumper.

Re: Tom's 92 1G Talon partout thread
 

You are the current high bidder. The faster you come the better your chances. :) So tomorrow if you want to be at my house at around 4:30 the bumper and headlights are yours.

Re: Tom's 92 1G Talon partout thread
 

Yes it has a brand new throw out bearing installed during the buildout of the motor. So less than 250 miles on the TOB.

Re: Tom's 92 1G Talon partout thread
 

how old is your timing belt?

Re: Tom's 92 1G Talon partout thread
 

I'll be next in line for the headlights, let me know if previous buyers flake.

Re: Tom's 92 1G Talon partout thread
 

Alright sounds good i will come at 4:30 then. wanna pm me an address. thanks

Re: Tom's 92 1G Talon partout thread
 

Updated OP, Front Bumper, Ecu, rear seat belts and Headlights w/hids are all sold.

BUY BUY BUY All of the procedes from this part out will go into a shoebox and will be used as a downpayment on an Evo X. :) Help a brotha out vanilla faces.

Re: Tom's 92 1G Talon partout thread
 

updated list bump

Re: Tom's 92 1G Talon partout thread
 

Interested in the brakes and maybe some body panels if you decide to part out the body. I have cash in hand ready to go.

Re: Tom's 92 1G Talon partout thread
 

The fenders are crap, Doors are in ok condition (need paint though. The rear bumper is ok but needs paint as well.

Re: Tom's 92 1G Talon partout thread
 

do i get a discount if i buy in bulk lol?

Re: Tom's 92 1G Talon partout thread
 

Is the VC still available? If so, can I get a picture PM'ed to me? Thanks.