Re: Something I've Been Working On...
 

Nice work man, try a honda half radiator.
A ton of guys are using them with great results, i think TKR is on one on his DD evoh

Re: Something I've Been Working On...
 

Yea thats what i was going to do, I grabbed the specs off of one on ebay so hopefully it will work out with two fans...

Anybody used a coolant additive and have any luck? I dont think i will need it but just in case.

-Stephan

Re: Something I've Been Working On...
 

I just have a del sol alum 1/2 size it is 2.5in thick and I am just running a 10in fan and 50/50 mix never see anything over 180

Re: Something I've Been Working On...
 

Lookin better :)

Re: Something I've Been Working On...
 

hurry up and finnish it so mine and doc's car's can stomp all over you

Re: Something I've Been Working On...
 

Hurry up and give me some money, this shit takes time... What do you and doc drive?

Re: Something I've Been Working On...
 

Nice man! Sell me your turbo!

Re: Something I've Been Working On...
 

I'll sell you this one as soon as i get the BB one:D

Re: Something I've Been Working On...
 

Any progress?

Re: Something I've Been Working On...
 

Of course not... But i did get a new job on monday and i have some saving bonds saved up that i didnt even know i had.

I will be making progress as soon as i get paid and cash in these bonds.

Next to be bought will be the AEM EMS, A1000, And a SMIM w/Q45 TB;)


I will post up pix and info when i get some


-Stephan

Re: Something I've Been Working On...
 

More PIX!!!

Picked up the FPR, SMIM, and Q45 TB From John, I also picked up a set of 17" ADR DV8's, and some other goodies...


At this point I started going through some of the wiring, Im trying to keep it as clean as possible but there isnt much i can do without the EMS and sensors.

Hopefully soon i will be picking that up as well as the fuel setup...

I will update as the progress continues:)

-Stephan

Re: Something I've Been Working On...
 

looking good man! Can't wait to see some numbers!!

Re: Something I've Been Working On...
 

I want those cam gears. Exactly those..

-A. Swift

Re: Something I've Been Working On...
 

Picked up the fuel setup today and did a little bit of electrical work, I'll post more details later im tired and lazy right now.

I'll be ordering the cell and some fuel line today so hopefully there here by friday, and im going to try and pick up the EMS by this weekend too...

Here are some pix, sorry if there shitty the digital camera was dead so i used my cell phone.

Re: Something I've Been Working On...
 

What color is your car gonna be?

Re: Something I've Been Working On...
 

Hey I looked at a summit catalog this morning, a lot of the companys that make AN fittings also make alum. hard line sold in coils or even steel like that mates up with -8 or -10. Didn't see any thing for -12 though.

Re: Something I've Been Working On...
 

Thats a pretty sick setup!

Re: Something I've Been Working On...
 

I kinda like the "backwards" fuel system.

Re: Something I've Been Working On...
 

Uh yeah, mikes right? The feed from the pump should go right into the rail, and then from the rail into the AFPR, then to the return line.

Re: Something I've Been Working On...
 

The feed from the pump does go right into the rail, on the drivers side of the rail... It doesnt "have" to go the same direction as stock... I had my car setup the same way and it worked just fine. A lot easier to set it up this way with -10AN lines. They are not so easy to bend.

Picture = http://i36.photobucket.com/albums/e2...Picture083.jpg

Both lines come from the same side, feed follows the firewall and into the right end of the fuel rail, then out the left side and into the FPR, then back to the fuel cell.


Setup looks good man. Interested to see this thing run next year hopefully!