Log in

View Full Version : Ignition questions


Pages : [1] 2

dsmberge
09-20-2005, 09:33 PM
I have a 90 eagle talon all wheel drive. I have the jdm cyclone motor (91). It is running on 2 cylinders. My question is, i have a 90 ecu and and a 90 coilpack. Will that work with the 1991 motor. It is also throwing a check engine code which i believe was code 44 which is the transistor/ignitor(correct me if im wrong), but before i order one i need to find out if the setup we have is wrong. Should i put all 91 parts in it or all 90 parts.

JET
09-20-2005, 09:44 PM
Put the 90 transistor pack on it too. Did you use the 90 TB and CAS?

Outlaw1
09-21-2005, 07:44 AM
I have a spare '90 Transistor that I can let you try, if that helps you any.

dsmberge
09-21-2005, 02:41 PM
I have a spare '90 Transistor that I can let you try, if that helps you any.

That would be awsome, where are you located?

Outlaw1
09-21-2005, 02:41 PM
That would be awsome, where are you located?
Lakeville.

KcGsXrated
09-21-2005, 09:24 PM
Put the 90 transistor pack on it too. Did you use the 90 TB and CAS?
Are You skipping jets questions? They are pretty reasonable...

KcGsXrated
09-21-2005, 09:26 PM
yes/ no?

dsmberge
09-22-2005, 11:13 AM
Yes i do have a 90 TB and i do have a 90 CAS.

Outlaw1
09-22-2005, 11:33 AM
The TR from a '91-94 will not plug into the harness on a '90. The plugs are different.

LightningGSX
09-24-2005, 05:32 PM
You can mismatch 90 and 91 ignition parts, the only major difference is the tach signal going to the ECU and guage is inverted