Trany

[Enes]

OK,

How do you remove the 5th gear from a fwd 2g 5sp trany???

puley pullers have too fat teeth to fit around the gear and its super tight on there..

don't want to pry it off because it could break...

Anyone got a puller that fits for it?

-E

[MustGoFaster]

You might consider getting a cheap one and grinding it down. If you pry they sometimes chip, put I don't see how a puller is really going to eliminate that possibility completely unless there is some were else to pull on.

[v8klla]

mine was pretty loose, just slid off, but a friend had to use a puller to get it off...They aren't that brittle, you can pull em pretty hard, but I have chipped a few myself...As long as the tooth itself is still intact there wont be a problem, minor chips are expected...

Chris

[JET]

There are several different kinds of pullers. I found one at an auto parts store that had pretty fat teeth. Make sure to get a 3 prong one. I did have to grind them down a tad, but they were pretty damn close. It was at autozone I think.

[Enes]

Alright, i will go take a look thru few stores and find something that works.... hate being stuck

[1Fst14B]

take 2-3 prybars/ screwdrivers possible and pry....should work

Adam

[JET]

I couldn't get that to work. I was literally standing on 2 pry bars and it didn't budge. Both were over 12" long too. Just get the gear puller, it will save a lot of frustration. You can borrow mine if you want too. Dunno why I didn't think of that earlier!

[Enes]

Thanx jet, if the one i got don't work i will take you up on that offer...

Now since TRE is being a little behotch won't sell me shift forks / shift rails and new syncros... and didn't answer my questions i sent them

the only answer he had for me...

I don't have any parts but you can spend $2400 on a trany i have and add the upgraded parts you want in there and i will ship it to you right away...



after he told me he don't have any parts... bull f'n shit..

-E

[Enes]

anyone else that would sell me the good shift forks / rails and good syncros for the 2nd gear and 3rd gear


any other upgrades you would suggest for the 2nd gen FWD?




and no i won't go to a 1g

[Enes]

no one knows who else sells good shift rails..

I saw that BMtranny.com has billet shift forks, how do those compare to the evo one's ... which one's are better..


-E