PDA

View Full Version : Anyone have access to Mitsubishi Part numbers?


Onefast99gsx
01-24-2005, 03:18 PM
Hey all,

I need a part number and pretty fast. I'll describe what i need. In side the transmission, you see the viscous coupler, when you pull the snap ring off and take the V.C. off, you then see the center diff. There is 2 steel balls that go in a hole on each side of the center diff. They mate with the shaft that goes to the Transfer case. I lost one of the steel balls. Can someone please help me???

It's a '99 Eclipse GSX.

I could also use the part numbers for the 2 transmission axel seals where the half shafts go into as well.

THANKS!!!

Shane@DBPerformance
01-24-2005, 04:01 PM
Call the dealer... or Chris Cabe at Brookedale.

DSMPARTSGURU
01-24-2005, 04:13 PM
Well guy,

The caps only show one ball. SO iasked one our senior technicianS and he claims theres only one ball. He said there might be a spot for 2 but there should only be one. Let me know if this helps...

chris

Onefast99gsx
01-24-2005, 04:21 PM
Chris, thank you very much. That helps alot! I do have the one. Since the center shaft has a hole on each side i just assumed there was two. You can't imagine how much i looked on the floor yesterday. I was even looking for bearings that i could break open use the ball.

Thanks for checking.

I'm going to PM you.

DSMPARTSGURU
01-24-2005, 04:26 PM
no problem thats what im here for.:eek:

chris