Injector Clips And Exhaust Gaskets

[Khadgar]

First off, are the clips that hold the injectors in place (stops tehm from rotating?) important? or are they just throw away. Second, anyone know a local place i can pick up some 2.5" exhuast gaskets?

[john]

I believe car-x has them. Car-x in hopkins had 3" gaskets that fit (collector gaskets) when I was looking. They should have 2.5". How many do you need? I may have an extra at home.

[illz]

i dont know of any clips that stop the injectors from rotating, i know of clips that hold the connector on to the injector, and i would say they are important. probably dont want a shaking motor loosening injector connectors leading to an intermittent connection, detonation, and a blown motor.

[Khadgar]

They are behind the injectors and stop them from rotating, they are made out of metal, ill get a pic after work.

[john]

I am not aware of those clips either. Just the ones that house the electrical connectors. BTW, I do not have any of the clips on mine and have had no problems. They all broke off a while ago. I plan on getting them though.

[Super Bleeder!!]

ugh, i hate those harness clips... they are the devil

[Khadgar]

Yeah I hate those as well, I finnaly freaked out and snapped all of them with a screwdriver and just bought the "better" ones Machv sells. We'll see how those work tomorrow when I put them on, btw I'll try to get a pic of the other things im talking about tonight, i just need to find the cameras mem card.

[Khadgar]

Anyone got a pic of a fuel rail bolt?

[john]

I will remove one and take a pic when I get home. I believe they are 8mm X 1.25 pitch and about 60 or 70 MM long (2.5-3"). They are most likely the 3 cleaner bolts you will have in the stack.

[Khadgar]

I swear I labeled those and put them in a bag but I cant find my pile of bags so I am just looking through my assorted bolts and found nothing that fit.