injector size fuel delivery 35r

[dsmreck]

Just wondering what injectors i should get and fuel delivery for a 35r to make around 600 @ db dyno.
I have a 255 in tank do in need an inline?

[scheides]

E85 or race gas? Uncorrected or corrected?

2G DSM I assume based on your profile?

I'd say you'll need FIC 1680's or the 2150's.

You will definitely need either a BAP on your 255 and maybe a second pump or a bigger base pump (like the Walbro 400). This is where you get to spend a lot of time researching other people's setups and then decide what you want to do, then spend money and more time making it work. :)

[turbotalon1g]

Message DB?

For sure twin 255s or the wally 400, I'd do a hi-z 16xx if pump or 2150 if E85.

Good luck.

[JET]

^ What he said.

[dsmreck]

damn that big? Yes i'm doing research as well. I considered a 400 pump and 1450cc injectors. Yes e85 and link v3. I really don't understand what it takes to make these bigger injectors or even high z. Why such big injectors for a 65lb/min turbo? NOOOOOOOOOB

[4seasons69]

Just wondering what injectors i should get and fuel delivery for a 35r to make around 600 @ db dyno.


damn that big? Yes i'm doing research as well. I considered a 400 pump and 1450cc injectors. Yes e85 and link v3. I really don't understand what it takes to make these bigger injectors or even high z. Why such big injectors for a 65lb/min turbo? NOOOOOOOOOB

Yeah if you're shooting for 600 at db that's no joke . That's a ton of power considering their dyno is very low reading. Since you're going with e85 I would just go with the 2150's and be done with it.

You will also need a second 255. Not sure if one walbro 400 would support 600 at db probably with a boost-a-pump it would.

[Shane@DBPerformance]

Might need a bigger turbo.

[dsmreck]

must be tougher than I thought with a 35r. ok lets just say I want to max a 35r out? Does that change injector size? What would I need besides link to run 2150's low impedance I assume. I also want to street this car when weather permits.

[CornFed2.4]

They don't make a low impedance 2150. At least that I'm award of. But as Shane said you may need a bigger turbo to hit 600hp at DB even if you max the turbo out. Finding link right now of proven setup as yours is going to be very similar to Brads.

I think he did it with a required 255 and boost a pump but maybe I can text him so he can chime in.

Ninja edit:

http://www.mitsustyle.com/forums/showthread.php?t=20970

[dsmreck]

thats a nice build now we r texting lol. bad ass but was that a 2.0 what power did he make.