no start 1g

[slammedndirty]

Bought a 93 laser with bent valves. So I replaced the head. I have spark, fuel, compression 150 all the way across and timing is dead on. I just replaced the ecu as well.

I got the car running 4 days ago and it ran for about 5 seconds then slowly idled down and killed and it would do it over and over. when I went to try to start it this morning it won't start at all. still has fuel,spark compression and timing is still dead on..


Someone please help me!!!

i got a case of beer for the first person to come figure it out :)

[Super Bleeder!!]

is the coolant temp sensor unplugged or broken?

[slammedndirty]

plug is broken but i have it wired up to the sensor

[Super Bleeder!!]

if that connection isn't great the car wont start

[slammedndirty]

ok i will go recheck it now

[Halon]

Agree'd check that connection. Also check the CAS plug, and ensure the CAS itself is installed correctly (not 180* out).

[slammedndirty]

the one connection seemed a little loose so i crimped it down more and it attempted to fire.. but still nothing

[slammedndirty]

Agree'd check that connection. Also check the CAS plug, and ensure the CAS itself is installed correctly (not 180* out).


cas is good tested it on a buddys car and its putting out spark

[1999Gst]

Check fuel psi at the rail

[Halon]

cas is good tested it on a buddys car and its putting out spark

I'm not implying it's bad, i'm saying ensure it's connected fully, and ensure that when you installed it on your car, you did so correctly because it's easy to accidentally install it 180* out.