View Full Version : no start 1g
Halon
11-30-2012, 01:04 PM
Other thoughts:
Massive vacuum leak
Verify all 4 plugs are sparking (maybe you have a bad coil, only running on 2 cylinders)
Base ignition timing (center the CAS in the slotted holes to start with)
BISS screw improperly adjusted
MAS bad or unplugged
Do you have a logger, or link, to look at some of these signals?
slammedndirty
11-30-2012, 01:06 PM
Other thoughts:
Massive vacuum leak
Verify all 4 plugs are sparking (maybe you have a bad coil, only running on 2 cylinders)
Base ignition timing (center the CAS in the slotted holes to start with)
BISS screw improperly adjusted
MAS bad or unplugged
Do you have a logger, or link, to look at some of these signals?
im buying a logger today hopefully and there is spark on all 4.. i will check the others
Alpha D
11-30-2012, 08:28 PM
Ive started my car, both with a bad ECT sensor and a maf that is unplugged. Make sure to check for a bad and weak coil pack as well. You said you verified spark? And how do you know youre getting fuel? Pulled the plugs and smelled them or lf they are wet? Check youre fancy relay under the the radio as well. Ive ran in just about every no start condition there is on these darn things...sometimes its really simple other times it could be intermittent...also I did not hear you mention you checked your main block fuses check those as well.
slammedndirty
11-30-2012, 09:10 PM
Vacuum leak mixed with a bad maf.. Got it running thanks guys :)
slammedndirty
12-22-2012, 02:19 AM
So i got the car running and drove it a couple times around the block. Let it sit for a couple days cause i have been busy with work, and now it wont start again. Has fuel spark compression and timing is on..... Any other suggestions ?
Goat Blower
12-22-2012, 08:32 AM
What do the plugs look like?
Halon
12-22-2012, 09:35 AM
Old gas?
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.