View Full Version : Built 2G DSM Part Out (35R, big brakes, Shep trans, etc.)
CornFed2.4
08-18-2012, 03:35 PM
^^^ what are you talking about?
Speedfreak yes a 2 g trans fits in a 1G. But a 1g will not fit in a 2G because 2gs having 3 mounts on the trans and 1gs have the mounts on the block.
Make sense. I don't know what dudes taking about with 2ga and 2Gb yeah the t-cases need to be matching with yrs. But not related at all to your question asked.
Speedfreak
08-18-2012, 09:37 PM
Being this car is a 2GB and not a 2GA a tranny swap between generations is a little more difficult. You will for sure need the 2GB transfer case with the 2GB transmission being that they changed the final drive in the trans in 97 and instead of changing the rear end ratio to match they made up the difference by changing the gear ratio in the transfer case. And I believe you need both the 2GB starter plate and possibly the bracket for the shifter cables. It is not a direct swap but it can be done if you get all the associated parts to go with it. Do some research and you should be able to find out what you need Dave to include with it so it'll work.
^^^ what are you talking about?
Speedfreak yes a 2 g trans fits in a 1G. But a 1g will not fit in a 2G because 2gs having 3 mounts on the trans and 1gs have the mounts on the block.
Make sense. I don't know what dudes taking about with 2ga and 2Gb yeah the t-cases need to be matching with yrs. But not related at all to your question asked.
Thanks for the info, much appreciated.
DavidPHumes
08-19-2012, 02:19 PM
Updated OP with a few more parts and some more pictures. I also sold a few things, so I removed those. Don't be afraid to make offers. Some people have and ended up getting good deals. I just want this stuff gone!
DavidPHumes
08-19-2012, 04:36 PM
I decided to part out the long block. See the OP. The shortblock isn't for sale yet until I pull it out and make sure it looks good. The deck looks good, no cracks but that doesn't tell much of the story.
jrohner
08-19-2012, 11:32 PM
Any interest in selling the head w/o the cams & gears?
Any details on the porting job?
DavidPHumes
08-20-2012, 08:05 AM
So you just want the head with the valve springs installed? I could probably do that. All I know is it's been ported, polished and gasket matched... I'm in the dark as to the details of the port job otherwise.
Goat Blower
08-20-2012, 09:06 AM
I might be interested in the cams if you seperate them.
DavidPHumes
08-20-2012, 09:31 AM
Sounds good... I'll let you know.
DavidPHumes
08-21-2012, 08:45 AM
Bump... sold a bunch more stuff, updated the OP.
DavidPHumes
08-22-2012, 12:51 PM
Sold some more stuff, I will be in the cities this weekend if anyone wants anything brought down.
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.