Cost Analysis Of My Motor...

[v8klla]

Well, I decided to look back at my credit card transactions today and found out that I just passed the $10,000 mark for my motor! Yes, this is for just my motor and the supporting mods, it does not include the cost of my car or any exterior/interior modifications. 10 g's on performance baby, now I just need to get it running ;)

Chris

"I see a cold air intake, it's got a NOS fogger system and a T4 turbo, Dominick, I see an AIC controller, it has direct port nitrous injection..."

"Yeah, and a standalone fuel management system. Not a bad way to spend ten thousand dollars..."

[JasonR]

When I looked at my cards a year ago I was scared. I believe its worth it if you want the good stuff and the car to run the way you want. Good for you. This is America, lets spend $$$ and have fun. :bounce:

What engine, internals, turbo you get if you don't mind me asking?

[v8klla]

Yeah, it just ended up costing a lot more than expected... I think the take what you plan on spending, multiply it by two and add 20% rule is pretty accurate ;)

As far as my motor it is 7 bolt 4G64, Wiseco pistons, eagle rods, fully balanced and blueprinted, T3/T4 56 trim turbo with .82 A/R exhaust housing, AGP Spearco 2-216 front mount, 850's, DSMlink, Crower 414 cams, Crower valvetrain, etc...

Nothing special ;)

Chris

[JDM]

Originally posted by v8klla@May 17 2004, 04:56 PM


"I see a cold air intake, it's got a NOS fogger system and a T4 turbo, Dominick, I see an AIC controller, it has direct port nitrous injection..."

"Yeah, and a standalone fuel management system. Not a bad way to spend ten thousand dollars..."
"2-JZ No shit..."

"I retract my previous statement"

[Jana]

Yeah, it sucks how fast it adds up and you don't really realize it. That's why I want out and pay the shit off. Next time around (if there is one) it will be cash only.

I feel your pain Chris! :(

[At-Least-It's-An-Evo]

That shouldnt cost $10k. Unless there are alot of misc. unecessary parts. I'm still well under the $10k mark.

[v8klla]

Well this is what my cost analysis looked like:

Cost Analysis for 4G64 motor

DSMlink.com - DSMlink $650
Fuel Injector Clinic - 850 cc Injectors $350
Extremepsi.com – External Waste gate $225
GM – GM 3 bar MAP $80
Russell Imports – Block and Crank $325
Barnone Motorsports – Wiseco Pistons $460
Elite Autosport – Eagle Rods $350
Checker Auto – Rod bearings $20
Mitsubishi - $380
QPR - $405
Elite Autosport – ACT Flywheel $250
Summit Racing – Fuel pressure gauge $25
QPR - $850
Dejontool.com – Intake Pipe $130
AGP turbo – Front Mount $1150
Fullthrottlespeed.com – AFPR $150
Kyle – 1G Head $50
QPR - $40
Mitsubishi - $290
QPR - $300
SSautochrome.com – Exhaust Manifold $270
QPR - $40
Fuel Injector Clinic – Injector O-rings $20
QPR - $105
Mitsubishi - $105
QPR - $400
QPR - $250
Barnone Motorsports – Piston Coating $65
QPR - $700
Ptuning.com – Fidanza Cam Gears $225
McCord – Exhaust Cutout $100
QPR - $1450 (Upcoming)
QPR – Down pipe $300 (Upcoming)

Some of the QPR costs are for Walbro 255, turbo, MBC, ACT 2900 clutch, Tial BOV, ARP head studs, shortblock assembly, machine work, cams, valvetrain, etc...

The mitsu stuff is for the timing belt, front cover, tensioners, gasket set, crank pulley, etc...

I think it got that high because I included all of the little stuff too.

And as you can see I spend a lot of time, and obviously $$$, down at QPR...Thanks guys!

Chris

[At-Least-It's-An-Evo]

Have fun with trannys. :goodluck: :secret:

[niterydr]

thanks for the business chris :beer:
Actually chris is a very very good sport, and I wish him 1000% luck with the '7 bolt'

[santa]

yeah Good luck for sure 7 bolt boy.... It should be a kick ass ride!