PDA

View Full Version : Wtb Fuel pump 1g head and a few other things


Pages : [1] 2 3

way2fastalon
07-15-2011, 05:36 PM
im looking to buy a few things

would like 2nd hand if you know some one who has parts pm me


i need a better fuel pump
i have a wally 255 in the tank i would sell or partial trade up for a bigger one

pumps im looking for are x2 bosh 044 or aeromotive a1000 or equivalent

a fuel cell
after market fuel filter

{Im looking for a bare 1g head in good condition }

valve springs brian crower dual spring or comp cams

Soild lifters

looking for 1300-1650s cc injectors id trade my 880s + cash

looking for fuel lines -8 an fittings

solid drive shaft or better bushings if anyone has them

engine mounts poly or solid will be fine id buy ither prefer both

front and rear soild and side engine mount poly and tranny mount poly

any holset turbo parts hx35 to 52 looking for hx40 compressor cover and wheel

aluminum flywheel act or fidanza

a core 2g trans 95 or newer

twin disk clutch set

oil cooler set up

power steering set up need everything to hook it back up from being deleted

Electronic boost controller or boost by gear set up

boost gauge 0-50 trade my pro-sport boost gauge for one mines -30 to 30 green or white

a pillar 3 port gauge

1g Black or Grey seats cloth or a 5 point race seat

1g sheet metal intake race version

battery box

kyb adjustable shocks

timing cover 6bolt all 3 top mid and lower

2.4 6 bolt crank

longemoco
07-15-2011, 05:43 PM
I have a 95 tranny u might find useful. It has a hole in it. And spider gear is missing a few teeth, but drove fine when pulled out. Let me know if interested. Cheap

blackawdtsi
07-15-2011, 05:45 PM
Why would you ever want to run solid lifters and solid mounts?

turbotalon1g
07-15-2011, 06:25 PM
BECAUSE RACE CAR.

way2fastalon
07-15-2011, 06:43 PM
if i want 10s i need to rev i can not on hyd + lift is more controlled and true and for the head i am going to building i plan on a 280/288 cam or 280 280 kiggly valve springs or bc crower

Chim55117
07-15-2011, 07:03 PM
http://www.mitsustyle.com/forums/showthread.php?t=30020

I have KYB AGX's.

blackawdtsi
07-15-2011, 07:03 PM
if i want 10s i need to rev i can not on hyd + lift is more controlled and true and for the head i am going to building i plan on a 280/288 cam or 280 280 kiggly valve springs or bc crower

In that case you'll want to run a solid timing belt tensioner.

way2fastalon
07-16-2011, 01:07 AM
if i want 10s i need to rev i can not on hyd + lift is more controlled and true and for the head i am going to building i plan on a 280/288 cam or 280 280 kiggly valve springs or bc crower

In that case you'll want to run a solid timing belt tensioner. oh i am the stm one ... its a pain to ajust but it works well

way2fastalon
07-16-2011, 01:15 AM
somebody has to have a fuel pump laying around they want to sell i really need one mine is dying

TkrPerformance
07-16-2011, 01:04 PM
Got a full power steering set up