Project 2G GSX

[Sparky2211]

I'd skip the cam gears. If I remember correctly the HKS cams are designed to be installed straight up, maybe I'm wrong though.

If you can find a buyer for the EMS, I'd recommend ECMLink instead, it's a lot easier to tune and use.

Good luck with your project!

After talking with Shane, I think I am going to switch to ECMLink. I have a few questions though. What all do I need to run ECMLink versus AEM EMS? I'm guess I won't need my AEM AIT sensor anymore. Do I still need a 5-bar MAP or just get a 3-3.5" GM MAF? Trying to get everything together and ordered. I don't have the OEM ECU. Which one would I need to get?

[Halon]

Why a GM MAF? Why not just stick with a Mitsu one? 2g and Evo 8 MAS's go a long way. I personally wouldn't run a GM MAF unless I had no other choice, not worth the hastle in my opinion.

[asshanson]

Or you could keep the IAT and MAP sensors and run speed density with ECMLink.

[C3L1CA]

Or you could keep the IAT and MAP sensors and run speed density with ECMLink.

x2. Keep the iat and map sensor and just run speed density with it. I know you used to always want a '95 eprom ecu for ECMLink. I'm not sure if you can use other years that aren't eproms any more though.

[Sparky2211]

Or you could keep the IAT and MAP sensors and run speed density with ECMLink.

This is great news. I wasn't sure if that was an option with ECMLink. Makes me feel a little more comfortable that I would only need to give up the AEM EMS versus everything that I already have.

[asshanson]

And you'll be a couple hundred dollars ahead after selling the AEM and getting ECMLink.

[Sparky2211]

Even better, then I can spend it elsewhere.

[Sparky2211]

Added ECMLink to my list of parts to get. What should I run for injectors?

[goodhart]

Lots of people like the FIC 1680 high-Z injectors for E85. My FIC 1350's aren't bad, but a friend with a similar setup to mine has FIC 1450's and hates them.

Don't get PTE 1200's if you're running E85 either. There have been about a million of them to fail, some people say they are not compatible with E85, others have run them with no issues. I wouldn't take the chance on a vehicle of mine.

[Sparky2211]

Lots of people like the FIC 1680 high-Z injectors for E85. My FIC 1350's aren't bad, but a friend with a similar setup to mine has FIC 1450's and hates them.

Don't get PTE 1200's if you're running E85 either. There have been about a million of them to fail, some people say they are not compatible with E85, others have run them with no issues. I wouldn't take the chance on a vehicle of mine.

Cool, thanks for the info. Shane also recommended those injectors. Sounds like people have really liked them.