PDA

View Full Version : Perkul8r's 91 Galant VR4 1055/2000

Pages : 1 2 3 [4] 5 6 7
goodhart
03-29-2011, 12:23 AM
Have you adjusted the pedal at all?
Perkul8r
03-29-2011, 10:23 AM
No, Not yet, I was gonna look at that today. I gotta pull the rad to change out some things so I am also gonna bleed the slave cylinder again. Its kinda cramped in there with everything put back together.
Perkul8r
03-30-2011, 05:22 PM
Yes, The trans is in. BUt still first gear sucks. and clutch engagement is dam near right off the floor. I did try adjusting the clutch pedal, but it was already turned almost all the way out. So that didn't help as much.

But on the bright side. I finally get to take it home. Now just gotta stick to earning money for a rebuild.
19TsiAwd90
03-30-2011, 05:29 PM
Yes, The trans is in. BUt still first gear sucks. and clutch engagement is dam near right off the floor. I did try adjusting the clutch pedal, but it was already turned almost all the way out. So that didn't help as much.

But on the bright side. I finally get to take it home. Now just gotta stick to earning money for a rebuild.
your probably just not use to it quite yet and it will break in some too
Perkul8r
03-30-2011, 08:21 PM
Ya, the clutch is alot different than what I am used to. But it is a used clutch so hopefully it will be just fine.
HiImBrian
04-11-2011, 11:36 AM
You mentioned you fixed your gas door with one from an eclipse? Did you replace the whole door or what? My gvr4 gas door has a spot that looks like a lock assembly belongs there and just flops around. :(
Perkul8r
04-12-2011, 11:53 AM
Mine needed the plastic thing that attaches to the body. I'll take a pic of it shortly. But yes, I just grabbed one out of an eclipse and it worked perfectly.
Perkul8r
04-12-2011, 12:09 PM
The part i replaced was the plastic piece in the pic. I actually think I got it from a Laser, but they are the same.

http://i665.photobucket.com/albums/vv14/Perkul8r/Other%20stuff/IMAG0187.jpg

I just made sure to re lube it that way it wouldn't break again. lol
HiImBrian
04-12-2011, 04:18 PM
huh, the piece I'm missing is actually the latch on the gas door itself. I'll pm you a pic or something and figure it out.
Perkul8r
04-12-2011, 07:04 PM
Ah, Ya, I think I know what piece your talking about. I am not sure what other cars that would work off of. But I will do some looking.