Fancy Fuel System Questions

[Shane@DBPerformance]

Stock oem fuel filter with about 8k miles on it and have a -6 adapter so I'm running -6 from the filter to the line.

I wasn't going lean on the last dyno session was I once we figured out the crappy boost a pump dial?

No, I don't think we were having any problems at all. I think we hit the nitrous at a lower boost level and made around 550awhp without any signs of fuel problems with your simple setup.

[FattyBoomBatty]

Would a nylon-lined braided hose collapse like the rubber ones?

And Shane, when i was in China, I drank some corn juice like that at a restaurant.

[turbotalon1g]

I have a 310lph sitting around if you want it.

I wouldn't worry about changing the line.

[Halon]

I run a Nylon braided feed. No problems.

As for the duals working at idle, shouldn't be a problem at all on a 1G with an aftermarket AFPR. Stock FPR might be another story though.

[Halon]

No, I don't think we were having any problems at all. I think we hit the nitrous at a lower boost level and made around 550awhp without any signs of fuel problems with your simple setup.

Interesting. I know the Banjo is the weakest point. I was contemplating keeping the stock filter, and just getting an adapter to run a -6 feed. But the next weakest link is the filter so to be safe I decided to go ahead and use a higher flowing filter as well just to be safe. Good to hear that the stock filter flows enough for even Brad's setup, that's awesome.

[sleepydsm]

Ok, ill just do the twin 255s in tank, make a fancy way to attach them to the stock feed line, and get a fancy filter. Should be easy.

In reguards to the Hobbs switch, or Link controlled 2nd pump: I am worried about something failing and then NOT turning on the 2nd pump: BOOOM!

[mlomker]

I am worried about something failing and then NOT turning on the 2nd pump: BOOOM!

Same thing will happen if one of the two pumps fail.

[Halon]

Yes, but it's just adding one more component to the list that could possibly fail causing a one pump scenario.

[C3L1CA]

You going to build a motor to put the new fuel system to work or going to let the rebuilt one buck until she blows?