4g63t in my mirage sedan? fwd.

[thesoccadude]

so i have a mirage es with an auto. i've read on mirageforums.net but am not really understanding. if i want to swap in a 4g63t with a 5 speed, what should i use and what do i need as far as motor mounts, transmission, ecu, etc??

i'm looking at a fwd considering awd is way out of my budget.

[Ihearrtdsm]

what generation you have?

[thesoccadude]

sorry, it's a 4g. 1993 mirage es sedan with a 1.8 auto.

[Ihearrtdsm]

http://www.mirageforums.net/viewtopic.php?f=52&t=15567

^ What I gathered from this is: Dsm motor, tranny on the forum above said 1.5l and 1.8l work, evo 1-3 motor mounts, ecu, wire harness, and sensors(I'm probably missing some stuff).

http://www.mirageforums.net/viewtopic.php?f=52&t=793

hope this helps!

[4g63tcrazy]

4g61t.org would have some good info.

[TkrPerformance]

A pm would have worked also or you could have looked at the coupe that I built. But any way
91-94 ecu
91-94 engine harness
Make a boom sling harness to go from mirage to dsm for the dash
2g block mount
2g upper engine mount
1.8 auto tranny moint
1.8 auto tranny frame rail mount
2g turbo fwd tranny
Mirage tranny roll stop mounts bolted to the 2g tranny
1g gsx front axels both sides

You also can use a 1g tranny with custom mounts. That is what I did to mount a awd 1g tranny in the 95 coupe.

It is not that hard of a swap to do.
It is a lot easyer with evo 1-3 wiring. (I have a engine,dash,engine bay harness laying around)
If you need more info on doing it just ask me.

4g61t will not tell you nothing at all that is just for 3g csm's not the 4g's

[4g63tcrazy]

4g61t will not tell you nothing at all that is just for 3g csm's not the 4g's

Ahh, my bad. I figured they were very similar.

[Chim55117]

do i need a 6 or 7bolt considering evo 3's were 7? tkr, pm a price on the harnesses.. anyone ever do a straight auto 4g63t swap into a mirage?

[TkrPerformance]

no one has done a auto swap

you can use a 6bolt or 7bolt
you need to use the mirage tranny with a n/t fly 4g63
or
2g fwd 4g63 tranny


I would take for the evo harness
125.00 engine harness
50.00 dash harness and part body
75.00 for the engine bay harness

[thesoccadude]

so if i took an auto 4g63t out of a 2g it could swap in pretty easily?