Magnus Motorsports

[tpunx99GSX]

I had the majority of the same things with mine, except for the non welding. But other then that you dont see the bottom that much. espeically if you get their Magnus Fuel rail like i did.
The magnus motorsports logo isnt machined, its stamped. so obviously its not going to look machined. Oh well, as long as it works you will be fine.

[95tsi]

Thought I'd revive this thread. I was up in Duluth driving to my cousins wedding in Virginia, rolled into it in 4th gear and heard a loud pop. From then the car wouldnt idle. Pulled over thinking I had a blown off a pipe or something like that. I didnt see anything wrong so I started pulling plugs when I noticed the intake mani.... No pictures yet but, there is a 4" crack along the weld on right above the runners. Needless to say I had to rig it(tape, bubble gum, some paper, and a shoe string) to make it back to Duluth and now I have some JB Weld on it so hopefully I will make it back to St Cloud to get it fixed up properly. Yea for magnus!!

[blageo23]

One good thing is they do offer warrenty on that stuff. BUT good luck getting it to them. I didnt know how hard it was to ship to canada until I had to deal with this.

[goodhart]

We need some pics man! and pics of the temporary fix also

[95tsi]

not quite as epic as some but, either way its a pos. Sorry, no pics of the really stupid Macgyver'd roadside fix.

The JB weld bandaid.
http://mitsustyle.com/forums/attachment.php?attachmentid=9224&stc=1&d=1253490380

what lies below
http://mitsustyle.com/forums/attachment.php?attachmentid=9225&stc=1&d=1253490380

[goodhart]

ghey. Time for a venom!

[Jakey]

Does nobody remember all the garbage 1_Vicious_GSX went through with Magnus a few years ago? That in itself shows that regardless of their accomplishments, Magnus Motorsports is a poorly run business.

[blageo23]

Bring this back from the dead...
Ordered a RWD magnus for another car and I am less then amused by the quality of this one.
#1- 4 Months to get
#2- Center punch divots on the top side of the manifold (where they would have drilled for a regular mangus for the vacuum ports)
#3- Plate where the vacuum ports are is not even tapped
#4- Seems as tho the runners are not centered properly. looks as they filled with the welder a bit
#5- Nit pick but the magnus logo is milled on the top and bottom. they really couldn't make a different plenum for the RWD or machine it later.

I am calling tomorrow to talk to them. But as of right now I will never purchase another magnus manifold again nor will I recommend it to anyone.

[Swifty1638]

JMF FTW!! I love mine!

[goodhart]

JMF FTW!! I love mine!


Pushit2.0 REEF>JMF :p