PDA

View Full Version : O2 Sensors

Pages : [1] 2 3
Enes
03-25-2004, 03:05 PM
Ok, so if i remove my cat, the rear 02 sensor is going to burn out?

and it is going to give me SES light. correct?

-E
JustROLLIN
03-25-2004, 03:09 PM
On a 2g yes, it will.
1ViciousGSX
03-25-2004, 03:10 PM
It won't burn out, but it will throw a CEL.
JustROLLIN
03-25-2004, 03:11 PM
Good addition. Thanks.
TheBlizzard
03-25-2004, 03:56 PM
I think there is a kit you can buy to bypass that CEL for the second O2 sensor though isn't there?

CRAIG
Kracka
03-25-2004, 04:29 PM
Who cares :0 Car will run the same, just pull the bulb out!
1ViciousGSX
03-25-2004, 05:57 PM
Originally posted by CUSTOMDSM@Mar 25 2004, 03:56 PM
I think there is a kit you can buy to bypass that CEL for the second O2 sensor though isn't there?

CRAIG
DSMLink or an O2 simulator
LightningGSX
03-25-2004, 10:01 PM
Some resistors or a IC voltage regulator will do the trick.
Enes
03-25-2004, 10:26 PM
Originally posted by LightningGSX@Mar 25 2004, 11:01 PM
Some resistors or a IC voltage regulator will do the trick.
how much?

-E
slowbubblecar
03-26-2004, 11:52 AM
Every car is different when it comes to CEL codes. I know someone on here who vents their bov and was driving around a while with the MAS unplugged without the CEL poping. It was a 2g. With the MAS plugged in it still doesn't go off with the bov. My car (2g) pops a CEL when just venting a bov. With my MAS unplugged the car will not rev past 2000 rpm.