PDA

View Full Version : GsXtUrBo98's 2G project thread

Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [37] 38 39 40 41
GsXtUrBo98
08-15-2012, 09:42 AM
true
Shane@DBPerformance
08-15-2012, 09:42 AM
Why BR7ES and not BPR7ES?
95talonracer
08-15-2012, 09:43 AM
Do you have another stock coil to try? How old does your coil look?
93gtpeater
08-15-2012, 10:37 AM
You could have a bad plug. I know you said they are brand new but one could be bad. I had that happen to me before. You spark plug wires could be shorten out. You have a good battery and volts?
blackawdtsi
08-15-2012, 10:38 AM
Do you have another stock coil to try? How old does your coil look?

Better yet, what are their resistances?
95talonracer
08-15-2012, 10:49 AM
Did you also try new quality wires?
GsXtUrBo98
08-15-2012, 11:00 AM
I have Taylor 10mm wires that I bought just before Brainerd last year. I have an extra set of plugs that I could throw in there and see if it does anything.. One coil was bad last year so I swapped it out and all was fine. I have a brand new yellow top battery in my car as well.
turbotalon1g
08-15-2012, 11:55 AM
No reason, I actually run bpr7es, but wanted to try br7es heard some good things plus seems like no-one stocks bpr's up this way. :(
93gtpeater
08-15-2012, 11:57 AM
Do you have a volt gauge to make sure you have enough volts? Somebody last year had a problem they werent getting enough volts. just throwing stuff out there try to help.
Shane@DBPerformance
08-15-2012, 11:57 AM
We usually use the BR plugs on nitrous cars and maybe some crazy high builds. Might lose some compression ratio with the short plug though. :)