Swifty's never-ending project thread!

[niterydr]

So you are actually going to fully assembly and wire in everything this season?

The 500+ you made last year at 24psi wasn't that bad at all considering the issues you still had and well...how the car was put together. A little polishing and tiddying up loose ends and you should be good to go this season.

I already told you the AEM can comp for changes in afr if that wideband is wired into the aem and calibrated correctly (as well as accurate). It is the octane swings related to timing that I was worried about (as Shane mentioned above). In the end its your car and whatever makes you happy.

Post up completed pictures when you are done.

[scheides]

Check it out swifty! I can post the pics you emailed me, like magic!

Click goadvanced to reply,
then click 'manage attachments'
then pick the files I want to upload (I saved your pics to my local computer!)
Then once they're uploaded, you can either just leave them be (thanks to the new nifty shadowbox feature)
OR you can right click on the links to the images and copy the link, slap it between some IMG tags and you're set:

http://www.mitsustyle.com/forums/attachment.php?attachmentid=8222&stc=1&d=1234456172

http://www.mitsustyle.com/forums/attachment.php?attachmentid=8223&stc=1&d=0129091358.jpg

http://www.mitsustyle.com/forums/attachment.php?attachmentid=8224&stc=1&d=0130091551.jpg

http://www.mitsustyle.com/forums/attachment.php?attachmentid=8224&stc=1&d=0211091942.jpg

Add some comments like:
"Progress pics. manifold off. fuse box m s d and etc removing and relocating. cam gears installed. pipes mocked up. etc.
-A. Swift"

And you're set. Please continue :D

[Shane@DBPerformance]

Whats with all the heavy SS braided lines? What size are those catch can breather lines?

[Pushit2.0]

-6

[ylimert01]

wow I had a headache before reading this thread and now I have a migraine..good luck with project hope it makes it to the dyno day!!!!!

[Swifty1638]

~8 actually. it was the catch can pff maps rxfdsm thing. sheides can you clean ip the thread a bit so i dont get a headache?

[tehehodi]

OMG! pictures!!! Still want that mojito? lol

[FattyBoomBatty]

This thread sucks, haha.

the bigger the catch can lines, the more oil it can catch.

[Swifty1638]

yea, but higher boost will raise crankcase pressure..look what happened to the RX7. Hence why they needed a bigger can. MY can hasn't been filled much at all, and I remember what happened with the old can and NO vent hole or filter for it..wow..smoke like no other! This seems to work well for me.

I got the exhaust cutout today, and the WG should be here soon. Sat, John will come back over to continue the wiring process, check grounds ( must be a wiring issue, as to why it didn't rev last year) and to degree the cams.

-A. Swift

[niterydr]

Looking good!