Cleaning up the Engine Bay

[cman3000]

Just looking for suggestions on how to make my engine bay look cleaner. Want to keep the a/c and cruise. Here is a current pic:

http://img26.picoodle.com/img/img26/3/12/2/f_fDSCF0384m8m_15d53b3.jpg (http://www.picoodle.com/view.php?img=/3/12/2/f_fDSCF0384m8m_15d53b3.jpg&srv=img26)

[twack]

-Battery Relocation,
-Throttle cable under manifold,
-Coil on plug or move coil pack down,
-Injector harness under manifold,
-If thats an oil pressure or temperature sensor on the head, maybe you can move that down to the oil filter housing,
-Maybe move your power steering hose under the motor mount (it fits)
-Remove firewall padding,
-Lower main wireharness on firewall
-Move to MBC that isnt in the cabin
-Move firewall components to lower places.
-Remove tabs holding lines and wires

[4g63tcrazy]

Loop throttle cable below intake manifold. Drop battery down on the cross member. Injector wire and thermostat housing harness could be ran under the intake manifold. Lower coil pack and anything on top of the firewall could be moved down. There are plenty of other holes for mounting. You didn't say anything about power steering but I'm gonna guess you wanna keep that..

Here is the link to my tuck I did from beginning to end. http://www.dsmtalk.com/forums/showthread.php?t=188468&highlight=wire+tuck

Annndd here is the pic of my bay to give you some idea's.
http://i224.photobucket.com/albums/dd75/nashmkna/turbolast001.jpg

[Swifty1638]

hey crazy..you should swing by my house in savage and tuck mine!

-A. Swift

[4g63tcrazy]

How much money we talkin? haha

[Swifty1638]

lol whats it cost? lol

-A.Swift

[4g63tcrazy]

Depends on how much you want done.

[Swifty1638]

fuse box relocation..cleaning up of other wires..

-A. Swift

[4g63tcrazy]

Fuse box was tough man.. I don't know if I wanna do that again. haha. The other stuff though isn't all that hard. If you follow the thread I made it should be pretty simple.

[FattyBoomBatty]

Turn the pipe with the BOV upside down so you don't see it.