got the car dynoed

[HiImBrian]

http://youtube.com/watch?v=5UEtE-hCudE
269.4awhp @22 psi
I'll make a real vid during work sometime.

[Halon]

What boost was that at? That's about what my 50 trim setup was making on pump, at about 20psi on the SAFC. I remember there wasn't hardly anything we could do to stop it from knocking.

[FattyBoomBatty]

You can always lower the boost! ;)

[Halon]

I had the boost controller turned all the way down on my setup.

[turbotalon1g]

nice, lots of smoke, sure i could take you on pump gas. hahahaha

[HiImBrian]

What boost was that at? That's about what my 50 trim setup was making on pump, at about 20psi on the SAFC. I remember there wasn't hardly anything we could do to stop it from knocking.

22 psi

nice, lots of smoke, sure i could take you on pump gas. hahahaha

Are you saying you are sure you could take me? We'll have to line em up sometime. Only smoke on the one pull. Shane was still tuning when I took these vids.

[Kevin 1G Drummer]

The smoke was from when he hit the rev limit. Not too shabby.

[Super Bleeder!!]

Needs real cams and ethanol.

[scheides]

Pretty sweet man! DSMLink? Great power IMHO. Now keep it running! My 2G made very similar power with b20g, FMIC, 650s, and SAFC, no cams.

[HiImBrian]

Needs real cams and ethanol.

cams for sure, but I decided not to go with e85. I had pte 1000s but I changed my mind and sold em. The car is quick enough, I don't wanna make too much power and start breakin other stuff. I'll leave that for the next owner...o yea btw, it's for sale :)

simplified mods list:
dsmlink
50 trim
680ccs
walbro255
afpr
dejon 3'' intake
2.5'' long route ic
ebay fmic
ported 2g intake/exhaust mani
ported evoIII head/cams
3'' turbo back exhaust
tubular o2 housing
38mm tial wg
modded 1g bov
joe p mbc
1g tb