View Full Version : Evo Motor
GS_Turbo91
03-03-2004, 05:54 PM
ok so i was checking out my buddies Evo yesterday. and it looks like its completely flipped around. like the cam gears are on the left instead of the right. i know its the same motor with a few exceptions. would i be able to swap the motor out and put it in mine? i think i would have to flip the motor around so the cam gears and such will be on the right. let me know if u dont understand that
Nope wont work for exactly the same reasons you described. Its a mirror image of our motor.
1ViciousGSX
03-03-2004, 07:13 PM
But it does give the 420A guys something to think about. ;)
Halon
03-03-2004, 08:25 PM
u mean to DREAM about... cuz without tons of money im sure it'll remain purely a dream
Kracka
03-03-2004, 10:26 PM
Holy shit I just noticed that Mike has a bling meter! Nice :) You better slow your roll though, that thing is maxin' out.
SquackDiddy
03-04-2004, 02:34 PM
how many bolts does the evo motor have, 6 or 7bolt? and how strong are the internals?
-GSX-Falcon
03-04-2004, 02:54 PM
Not sure about the design but i would think the internals are pretty decent. It runs about 19 PSI stock....or so I have heard.
Halon
03-04-2004, 06:25 PM
internals on those cars seem to be rather tough so far. Mike from Road Race TRIED to blow his engine and didn't. He was dynoing the car, and decided to just say screw it, and so he ran it with the Greddy turbo kit with no boost control, and made like 400 sumthin HP, it's been awhile, so i don't remember the numbers. But his HP was purely turbo limited. The turbo ran outta juice, it was maxed out, and he was fully willing to max it out even if it cost him the motor. But the motor held together just fine. I heard the rods don't look that strong, almost like 2g rods, but they are holding lots of power so they must just be well designed
Shane@DBPerformance
03-04-2004, 07:53 PM
Originally posted by SquackDiddy@Mar 4 2004, 02:34 PM
how many bolts does the evo motor have, 6 or 7bolt? and how strong are the internals?
Probably at least 100 bolts on the motor. :)
AMS has made over 500whp on the stock internals. The rods look like the 1G/2G 7-bolt rods though, so 500+whp might not be the safest thing.
Kracka
03-04-2004, 08:23 PM
I believe they are an 8-bolt engine.
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.