PDA

View Full Version : No start


Pages : [1] 2 3 4

Kevin 1G Drummer
08-10-2007, 10:52 AM
So I was driving in one of the mall of america parking ramps last night looking for a spot, and just as I'm pulling up, I noticed my car started running a little rough. I pushed the clutch in, it died, and now it won't start. I've got spark and I can hear the fuel pump running as the car is turning over, and can smell fuel in the engine bay. I'm stumped as to why it would be running just fine, die, and not start. Any suggestions?

92 gsx
gm maft
walbro 255
brand new spark plugs

x-pride
08-10-2007, 10:56 AM
Hows your timing?

A//// Guy
08-10-2007, 11:08 AM
ECU has new caps? Mine did some funky stuff, and wouldnt start half the time when my ecu crapped out.

Kevin 1G Drummer
08-10-2007, 11:13 AM
The ecu caps have been replaced once already, but I dunno how long ago. The last time I checked the timing, it was spot on.

A//// Guy
08-10-2007, 11:17 AM
I would throw a spare ecu in if you have one, just to rule that out.

Kevin 1G Drummer
08-10-2007, 11:21 AM
The only other ecu I have is a socketed eprom with no chip. I'm still waiting on the keydriver chip I ordered.

Pushit2.0
08-10-2007, 12:10 PM
I have a kedriver chip I could sell you for cheap, let me know.

~John

Kevin 1G Drummer
08-10-2007, 02:43 PM
I just got the chip, threw it in the ecu, so I'll go throw that in and see if it does anything

JET
08-10-2007, 03:15 PM
Bring tools with to check the timing belt too.

Kevin 1G Drummer
08-10-2007, 06:29 PM
The car is home now, I put the eprom in, still didn't fire. Checked the timing belt, it's just fine. I'm thinking the cam sensor probably took a shit. I was looking at it, and noticed a little bit of oil at the bottom of it.