519 AWHP- So far....

[Goat Blower]

Finally got the old girl up to DB last night and got on the rollers. With Shane tickling the keyboard, we got her up to 519 AWHP with it breaking up a bit after about 3900 rpm. We gapped the plugs down a bit more and she was making a clean run until the lower IC coupler blew off again. It's such a tight corner out of the turbo to clear the front motor mount, there's no good way to keep it together at 30+ psi. So after we get an elbow welded on this week and I upgrade the upper pipe to a 3", we'll give her another go. The final couple passes were at about 32psi running straight E98 Ethanol and it was still about 85-90 degrees in the dyno room. The dyno curve is REAL nice, I love this combo for street/strip duty. Dyno sheet below.

http://www.mitsustyle.com/photopost/showphoto.php?photo=981&cat=500&ppuser=40

[NOT THE BLUE LAMPSHADE]

Nice dude, congrats! Now you need more power and more broken stuff!

[niterydr]

Awesome, gotta love alcohol fuels!

[TheBlizzard]

Great job Steve.

[Shane@DBPerformance]

It seems to be a good setup. It might be in the 550awhp range when we are done with it. Torque is in the 460s. It hits 20psi in the 4300-4400RPM range on the dyno and is to 30psi at around 4700RPMs. It should have a long powerband like my car did with the 67.

[TheBlizzard]

Gotta love the 2.4 spool up. Is that with the 3065?

[AJ]

11s here he comes! ;) LOL j/k Steve! Nice numbers, can't wait to see it haul ass down a track.

[Speedfreak]

Thats a solid 11 for sure! :) And those are DD #'s?

[DSM_421]

Yep, doesn't D.D. read a tad lower than other dynos, or did I hear wrong?

[A//// Guy]

Nice numbers!! Good to hear its out and about again making sweet powers.