PDA

View Full Version : "V"


Pages : 1 2 3 4 5 [6] 7 8 9 10 11

scheides
10-10-2007, 01:14 PM
Good luck! And take pix!

1ViciousGSX
10-10-2007, 02:04 PM
Good luck! And take pix!
Will do.

Goat Blower
10-10-2007, 02:23 PM
Nice, what mas WERE you running? I'm almost wondering if I'm going to have to bite the bullet and get a MAFT to keep my Tial BOV. Poo.

scheides
10-10-2007, 02:31 PM
He was doing MAF-T in suck-through setup :D

MAF-T is nice, I like it for the fact that you get to use a real BOV like the Tial. On the flip side, it can cause its own problems, so its a tough call over a 2G/evo MAS.

1ViciousGSX
10-10-2007, 02:45 PM
Nice, what mas WERE you running? I'm almost wondering if I'm going to have to bite the bullet and get a MAFT to keep my Tial BOV. Poo.
I'm just going to move my 3.5 GM MAF from in front of the turbo to in front of the throttle body, but behind my new Tial BOV. :)

1ViciousGSX
10-10-2007, 03:05 PM
On the flip side, it can cause its own problems, so its a tough call over a 2G/evo MAS.
I used to have tuning issues, but once I disconnected the RPM wire and set the MAFT curve to "0" they went away. I use DSMLink to adjust the airflow curve and fuel mixture, runs and drives like stock. :spin:

Goat Blower
10-10-2007, 05:25 PM
Did adding a second muffler/silencer to the 3.5" exhaust quiet it down a bit? I'm tempted to add another muffler to mine as well, it's a little loud for a daily driver.

1ViciousGSX
10-10-2007, 06:05 PM
Did adding a second muffler/silencer to the 3.5" exhaust quiet it down a bit? I'm tempted to add another muffler to mine as well, it's a little loud for a daily driver.
I never had the opportunity to try it with only one, when we built the system I just stuck both in, basically just built a much better version of my N1 system. I can definately say it's loud enough at idle and WOT that I can't see me ever thinking about taking one back out. What is really nice is that at cruise speed where the engine has leveled out, you can barely hear the exhaust, if any at all. That 3.5 inch set-up really sounds "hollow" at idle, blip the throttle and you know somebody's leg hair just got burned off. :lol:

Jakey
10-10-2007, 08:40 PM
Well I'll be busy this weekend starting my new intercooler set-up.
What did you pick for a core?

1ViciousGSX
10-11-2007, 07:17 AM
What did you pick for a core?
Garrett/PTE 24x12x4 part number 051-1200 :ring: