AFPR Problems

[AJ]

He doesn't have to do that, the car won't ever run :hah:

stfu and gtfo of the thread if you don't have anything worth 2 cents to contribute.

[Talon628]

I have a 750cc chip w/ timing topping at 18 degrees and an SAFC1 if you want them for $150. :)

150, how about ill buy them if you come put them in ill pay u for your labor..lol..serious though..

[Talon628]

or any one for that matter wanna earn some money, that can fix this for me, ive lost my will, and i mean im this close to being done, its not a big deal, i pay good too, like $20 bux and hour to fix it.

[Goat Blower]

Anybody on here that knows what they're doing is not going to work for $20/hour. Suck it up, tow it to a shop that will fix it, this is obviously over your head.

[xveganxcowboyx]

The worst was a kid on here that put in a safc and used duck tape on the wires to hold them to the ecu wiring after he striped the wires and he could not figure out why it did not work right.

I can one up that. When I bought my car I didn't realise that the last owner had tried to drill a large hole through the firewall. He put the drill bit straight through the large cluster of wires on the passenger side. A good portion of them were totally mangled and all touching each other. It was ugly.

[Talon628]

just the wiring shit is all dont wanna do, other than that i know what im doin so bite me, and anyone that needs a few extra bux was kinda what it was aimed for not for me to go and bring it to a shop to overcharge me for it..jesus I swear to god if you have nothing good to say on this thread keep it to yourself, dont know why you feel it necessay to add your 2 cents about nothing.

[JET]

other than that i know what im doin so bite me

Did this make anyone else bust out laughing?? :wink:

You need to fucking pay attention though, you have already been told that you don't have to do any wiring with DSMlink. You have gotten a lot of good information even though you have been an asshole through most of this thread.

So, get DSMlink and tune the car (hopefully by a professional) of if you want it to run right now, put the 450's back in.

[turbotalon1g]

Um, do we even have moderators on this board?
A couple of points, and good ones too.

1.Anybody on here that knows what they're doing is not going to work for $20/hour. Suck it up, tow it to a shop that will fix it, this is obviously over your head.

That is some solid advice.

2. This person thinks they know enough about cars to accuse the local shops of overcharging, some have actually lowered there rates enough where it is actually worth saving your time to let them do it and are open sundays *cough cough*.

3. While some members have been not so helpful, this member obviously doesn't want to listen to honest advice from others.

My take is listen to what some have told you, or set the car back to the way it worked and go from there. You might have fucked it enough already that you might need a shops help now.

Or if he persists to waste fellow members time because he doesn't get the answer he wants

http://sts.synflood.de/dump/fun/normal_ban_him.jpg

[Swifty1638]

If you want to be an aggressive asshole, then you will end up biting yourself. People are trying to HELP YOU with YOUR shit, DISPITE the f-ed up info we are all getting from you. If nothing is helping you, it's because either A) You are not listening, or B) You are not explaining it well enough.

I worked for shops before-dealerships, and private shops. I can tell you that NO ONE wants to work for free, when they took the time to learn everything they know, and own the tools to get the job done. That's like going into an airport, and asking a pilot to fly you to spain for 50 bucks, because that's "helping them out with money". would $20 even cover the cost to drive to "STC"?

Most shops in the area don't overcharge. I find them to be quite reasonable, for the services they provide. Hell, most would be more then likely to HELP you out, by cutting some of the bill, or charging a flat rate, instead of by-the-hour, due to a certain wiring mess that may exist. You get what you pay for. If you want to be cheap, then don't expect top-notch work.

-A. Swift

[n00b EEtr]

You've been a fucking douche bag in this entire thread, no one is going to help you. And you obviously DON'T know what your doing, because your car doesn't run, assclown. If you want your car to get fixed, go here.......

http://dsmstyle.com/forums/forumdisplay.php?f=8

There, something usefull as well ;)